Items where Subject is "T Technology > TS Manufactures"

A

Adi, Prayonne (2015) Upaya Pengendalian Persediaan Bahan Baku Pasir Silika Menggunakan Metode Economic Order Quantity Pada Industri Papan Kalsium Silikat. Gema Aktualita, 4 (1). pp. 17-22. ISSN 2302-5581

Adi, Prayonne and DARMAWAN, BRYAN and GOOIER, WILLY KRISTOFORUS (2023) Pengaruh Job Satisfaction Terhadap Employee Performance Pada Perusahaan Penggilingan Tepung di Surabaya. [UNSPECIFIED]

Alimin, Roche and Wahjudi, Didik and Gunawan, Hariyanto and POERNOMO, PRAYOGO PUTRA (2018) Regression Equations to Determine the Stages of Electric Current in Electrical Discharge Machining (EDM) According to the Level of Desired Surface Roughness with Shortest Processing Time. In: The 1st International Conference on Automotive, Manufacturing, and Mechanical Engineering (IC-AMME), 28-09-2018 - 28-09-2018, Denpasar - Indonesia.

Anggono, Juliana and , Hariyati Purwaningsih and Sugondo, Suwandi and HENRICO, STEVEN and SEWUCIPTO, SANJAYA and Patel, Jay (2019) Structural Evaluation on Sugarcane Bagasse Treated Using Sodium and Calcium Hydroxide. [UNSPECIFIED]

Anggono, Juliana and BUDIARTO, BILY and Sugondo, Suwandi and Purwaningsih, Hariyati and Antoni, (2020) The Strength of Polylactic Acid Composites Reinforced with Sugarcane Bagasse and Rice Husk. [UNSPECIFIED]

Anggono, Juliana and Farkas, Ágnes Elvira and Bartos, András and Móczó, János and Antoni, and , Hariyati Purwaningsih and Pukánszky, Béla (2018) Deformation and failure of sugarcane bagasse reinforced PP. [UNSPECIFIED]

Anggono, Juliana and Sugondo, Suwandi and Habibi, Niko Riza (2014) ALKALI TREATMENT ON SUGARCANE BAGASSE TO IMPROVE PROPERTIES OF GREEN COMPOSITES OF SUGARCANE BAGASSE FIBERS-POLYPROPYLENE. Mechanical Properties and Performance of Engineering Ceramics and Composites IX:Ceramic Engineering , Volume (Issue ). pp. 139-149. ISSN 978-1-119-03118-5

Anggono, Juliana and Sugondo, Suwandi and Habibi, Niko Riza (2015) ALKALI TREATMENT ON SUGARCANE BAGASSE TO IMPROVE PROPERTIES OF GREEN COMPOSITES OF SUGARCANE BAGASSE FIBERS-POLYPROPYLENE. [UNSPECIFIED]

Anggono, Juliana and Sugondo, Suwandi and Henrico, Steven and PURWANINGSIH, HARIYATI (2015) Effect of Alkali Treatment Using Calcium Hydroxide and the Fiber Length on the Strength Of Sugarcane Bagasse Fibers-Polypropylene Composites. Applied Mechanics and Materials , Vol. 8 (-). pp. 106-110. ISSN ISSN: 1662-7482

Anggono, Juliana and Sugondo, Suwandi and JOLANDA, RASSY ALIM and Purwaningsih, Hariyati and Wibawa, Aria (2018) Performance and Evaluation of Low Cost Sugarcane Bagasse – Polypropylene Biocomposites as Candidate Material for Automotive Parcel Tray. [UNSPECIFIED]

Anggono, Juliana and Sugondo, Suwandi and SEWUCIPTO, SANJAYA and Purwaningsih, Hariyati and HENRICO, STEVEN (2017) The Use of Sugarcane Bagasse in PP Matrix Composites: A Comparative Study of Bagasse Treatment Using Calcium Hydroxide and Sodium Hydroxide on Composite Strength. [UNSPECIFIED]

Anggono, Juliana and BUDIARTO, BILY and Sugondo, Suwandi and Purwaningsih, Hariyati and Antoni, (2019) The Strength of Polylactic Acid Composites Reinforced with Sugarcane Bagasse and Rice Husk. In: Quality in Research, 24-07-2019 - 24-07-2019, Padang - Indonesia.

Anggono, Juliana and Farkas, Ágnes Elvira and Bartos, András and Móczó, János and Antoni, and , Hariyati Purwaningsih and Pukánszky, Béla (2018) DEFORMATION AND FAILURE BEHAVIOUR OF SUGARCANE BAGASSE REINFORCED PP. In: 4th international conference on bio-based polymer and composites (BiPoCo) 2018, 06-09-2018 - 06-09-2018, Balatonfured - Hungaria.

Anggono, Juliana and Purwaningsih, Hariyati and Sugondo, Suwandi and HENRICO, STEVEN and SEWUCIPTO, SANJAYA (2018) Structural Evaluation on Sugarcane Bagasse Treated Using Sodium and Calcium Hydroxide. In: International Conference on Automotive, Manufacturing, and Mechanical Engineering, 28-09-2018 - 28-09-2018, Denpasar - Bali - Indonesia.

Anggono, Juliana and Sugondo, Suwandi and PURWANINGSIH, HARIYATI and HENRICO, STEVEN (2015) Improved Strength Of Sugarcane Bagasse Fibers-Polypropylene Composite Using Alkali Treated Fibres. In: The 2nd International Conference on Materials and Metallurgical Technology 2015 (ICOMMET 2015) , 11-12-2015 - 11-12-2015, - .

Arifin, Lilianny Sigit and Palit, Herri Christian (2013) COP Handbook. Technical Report. UK Petra.

Astuti, Dewi and Basana, Sautma Ronni and Tarigan, Zeplin Jiwa Husada (2012) BERBAGI INFORMASI DAN KUALITAS INFORMASI PADA IMPLEMENTASI SUPPLY CHAIN MANAGEMENT TERHADAP PENYUSUNAN LAPORAN KEUANGAN PERUSAHAAN. In: Seminar Nasional Local Wisdom Enterprenurship, 09-10-2012 - 10-10-2012, Surabaya - Indonesia.

Aysia , Debora Anne Yang (2013) Split Plot Design: Desain Eksperimen untuk Mengatasi Keterbatasan Randomisasi (Studi Kasus di Sebuah Perusahaan Logam). Indonesia Journal of Industrial Engineering, 3 (2). pp. 27-34. ISSN 2087-5118

Aysia , Debora Anne Yang and Gunawan, Desy (2008) Penurunan Tingkat Kecacatan dan Analisa Biaya Rework (Studi Kasus di Sebuah Perusahaan Plastik, Semarang). In: Design and Application of Technology 2008, 17th July 2008, Surabaya.

Aysia , Debora Anne Yang and Hartono, Natalia and Harmani, Thomas (2009) Preventive Action for Quality Improvement of the VTL Lamp in the End Process Quality Control (Study Case at a Lamp Manufacturer). In: The 11th International Conference on QIR, 3-6 August 2009, Jakarta.

Aysia , Debora Anne Yang and Hendryanto, Adelina (2010) Interpretasi Out of Control Signal pada Peta Kendali T2 Hotelling dengan Metode Dekomposisi sebagai Upaya untuk Mendeteksi Kecacatan. In: Seminar on Application and Research in Industrial Technology 2010, 29 Juli 2010, Jogjakarta.

Aysia , Debora Anne Yang and Julianingsih, Julianingsih and Adiluhung, Wishnu (2009) Peningkatan Kualitas Tape 31 melalui Desain Eksperimen sebagai Upaya untuk Mengatasi Komplain dari Konsumen. In: The 5th National Industrial Engineering Conference, 2nd December 2009, Surabaya.

Aysia , Debora Anne Yang and Setianingsih, Kurniawati and Sutanto, Tommy Liman (2009) Productivity Analysis and Improvement (Study Case at A Coffee Manufacturer). In: The 3rd International Seminar on Industrial Engineering and Management, 10-11 December 2009, Bali.

Aysia , Debora Anne Yang and Wiharjo, Halim (2013) Penurunan Kerusakan Iron Chip pada Produk Speaker dengan Model DMAIC. In: Seminar Nasional Terpadu Keilmuan Teknik Industri, 16-03-2013 - 16-03-2013, Malang - Indonesia.

Aysia , Debora Anne Yang and Yasin, Vivi (2008) Peningkatan Kualitas melalui Desain Eksperimen (Studi Kasus di Sebuah Perusahaan Krupuk, Blitar). In: Design and Appplication of Technology 2008, 17th July 2008, Surabaya.

Aysia, Debora Anne Yang and Panjaitan, Togar Wiliater S. and S, Y RYAN ADIPUTRA H (2012) Pembuatan Biogas dari Kotoran Sapi dengan Metode Taguchi. In: Seminar Nasional Manajemen Teknologi XV, 04-02-2012 - , - .

Aysia, Debora Anne Yang and Panjaitan, Togar Wiliater S. and Wibowo, Christianto (2013) Choosing Bio Ethanol Fermentation Process Combination with Two Levels Full Factorial Design Method. In: The 3rd International Forum and Conference on LSCM 2013, 27-06-2013 - 29-06-2013, Kuta - Indonesia.

B

Bartos, András and Anggono, Juliana and Farkas, Ágnes Elvira and Kun, David and Soetaredjo, Felycia Edy and Móczó, János and Antoni, and , Hariyati Purwaningsih and Pukánszky, Béla (2020) Alkali treatment of lignocellulosic fibers extracted from sugarcane bagasse: Composition, structure, properties. [UNSPECIFIED]

Bartos, András and Kocs, Judit and Anggono, Juliana and Móczó, János and Pukánszky, Béla (2021) Effect of fiber attrition, particle characteristics and interfacial adhesion on the properties of PP/sugarcane bagasse fiber composites. [UNSPECIFIED]

Bartos, András and Nagy, Kristof and Anggono, Juliana and Antoni, and , Hariyati Purwaningsih and Móczó, János and Pukánszky, Béla (2021) Biobased PLA/sugarcane bagasse fiber composites: Effect of fiber characteristics and interfacial adhesion on properties. [UNSPECIFIED]

Bartos, András and UTOMO, BENNY PUTRA and Kanyar, Barnabas and Anggono, Juliana and Soetaredjo, Felycia Edy and Móczó, János and Pukánszky, Béla (2020) Reinforcement of polypropylene with alkali-treated sugarcane bagasse fibers: Mechanism and consequences. [UNSPECIFIED]

Bartos, András and Anggono, Juliana and Farkas, Ágnes Elvira and Kun, David and Soetaredjo, Felycia Edy and Móczó, János and Antoni, and , Hariyati Purwaningsih and Pukánszky, Béla (2019) Alkali treatment of lignocellulosic fibers extracted from sugarcane bagasse: Composition, structure, properties. In: The Conference on Green Chemistry and Nanotechnologies in Polymeric Materials, 11-10-2019 - 11-10-2019, Riga - Latvia.

Basana, Sautma Ronni and Siagian, Hotlan and Ubud, Sahnaz and Tarigan, Zeplin Jiwa Husada (2022) The effect of top management commitment on improving operational performance through green purchasing and green production. [UNSPECIFIED]

Basana, Sautma Ronni and Suprapto, Widjojo and Andreani, Fransisca and Tarigan, Zeplin Jiwa Husada (2022) The impact of supply chain practice on green hotel performance through internal, upstream, and downstream integration. [UNSPECIFIED]

Basana, Sautma Ronni and Ubud, Sahnaz and Malelak, Mariana Ing and Tarigan, Zeplin Jiwa Husada (2022) The effect of key user capability on supply chain digital and flexibility in improving financial performance. [UNSPECIFIED]

Bisono, Indriati Njoto (2011) Mengenal Data Ekstrim dan Distribusinya. Jurnal Teknik Industri, 13 (2). pp. 81-86. ISSN 1411-2485

Bisono, Indriati Njoto and Robinson, Andrew and Phatak, Aloke (2011) Bayesian Spatial Hierarchical modeling for temperature extremes. In: Bayes on the Beach 2011, 06-10-2011 - 07-10-2011, Brisbane - Australia.

C

Cardenas-Baron, Leopoldo and Trevino_Garza, Gerardo and Widyadana, I Gede Agus and Wee , Hui Ming (2014) A constrained multi-products EPQ inventory model with discrete delivery order and lot size. Applied Mathematics and Computation, 230. pp. 359-370. ISSN 0096-3003

D

Dora, Purnama Esa (2011) USED CARDBOARD AD ENVIRONMENTAL FRIENDLY ALTERNATIVE MATERIAL. In: 5th International Conference and Workshop on Built Environment in Developing, 06-12-2011 - 07-12-2012, Penang - Malaysia.

F

Felecia, and HARTANTO, YUNITA and SASMITA, HENDRAWANGSA and PERDANA, BAYU and SUMAWI, HENDRIK and Setiawan, Robert Eko (2012) Reliability Centered Maintenence Based on Dampster Shaffer Approach. In: The 2nd International Forum Conference on Logistics Supply Chain Management, 11-05-2012 - 12-05-2012, Taipei - Taiwan.

Felecia, Veronica (2013) Fuzzy Logic Reliability Centered Maintenance. In: LSCM 2013, 27-06-2013 - 29-06-2013, Denpasar - Indonesia.

H

Halim, Siana and CHANDRA, ARIF (2011) Pemodelan Time Series Multivariate secara Automatis. Jurnal Teknik Industri, 13 (1). pp. 19-26. ISSN 1441-2486

Halim, Siana and Widyadana, I Gede Agus (2012) Production Inventory Model for Deteriorating Items with Common Distribution Machine Unavailability. In: The 2nd International Forum Conference on Logistics Supply Chain Management, 01-04-2012 - , Taipei - Taiwan.

J

JIPUTRA, JUAN ALEXANDER and Tarigan, Zeplin Jiwa Husada and Siagian, Hotlan (2021) The Effect of Information Technology on Retailer Satisfaction Through Supply Chain Management Practices and Retailer-Distributor Relationship in Modern Retailer Surabaya. [UNSPECIFIED]

N

NOVIJANTI, ENNY and Tarigan, Zeplin Jiwa Husada and Siagian, Hotlan (2023) The effect of supply chain collaboration on supply chain performance through production technology, new product development and product knowledge. [UNSPECIFIED]

Novitasari, Maya and Tarigan, Zeplin Jiwa Husada (2022) The Role of Green Innovation in the Effect of Corporate Social Responsibility on Firm Performance. [UNSPECIFIED]

O

Octavia, Tanti and Felecia, (2013) Comparing Variable Review Period model and Periodic Review Model. In: LSCM 2013, 27-06-2013 - 29-06-2013, Denpasar - Indonesia.

Octavia, Tanti and Felecia, (2014) Pengembangan ModelVariable Review Period dengan Mempertimbangkan Order Crossover. Jurnal Teknik Industri, 16 (1). pp. 59-66. ISSN 1441-2485

Octavia, Tanti and Felecia, and NATALIA, GRACE (2010) Base Stock Level yang Minimasi Biaya pada Permasalahan Single Order. Jurnal Teknik Industri, 13 (1). pp. 45-50. ISSN 1411-2485

Octavia, Tanti and Handojo, Andreas and KUSUMA, WELLY TEDJA and YUNANTO, TIMOTHY CHRISTIAN and THIOSDOR, RICHARD LAWRENCE and DANIEL, (2019) Museum Interactive Edutainment Using Mobile Phone and QR Code. In: International Workshop on Computer Science and Engineering (WCSE 2019), 17-06-2019 - 17-06-2019, Hong Kong - Hongkong .

Octavia, Tanti and Palit, Herri Christian and Putra, Victor Khoesnadi Mandala (2014) Comparing between Simulated Annealing Neighborhood Generation with the Combination of Simulated Annealing and Genetic Algorithm in Facility Layout Problem. Australian Journal of Basic and Applied Sciences, 8 (4). pp. 78-84. ISSN 1991-8178

P

Petra Christian University (2024) LAMPU (Lampu Meja Gadang). .

PUTRA, ARDIONO and Tarigan, Zeplin Jiwa Husada and Siagian, Hotlan (2021) Influence of Information Quality on Retailer Satisfaction through Supply Chain Flexibility and Supplier Relationship Management in the Retail Industry. [UNSPECIFIED]

Palit, Herri Christian and SUTANTO, WINNY (2012) PERANCANGAN RCM UNTUK MENGURANGI DOWNTIME MESIN PADA PERUSAHAAN MANUFAKTUR ALUMINIUM. In: Seminar Nasional Manajemen Teknologi XV, 04-02-2012 - 04-02-2012, Surabaya - Indonesia.

R

RIOFIANDI, DHERMA and Tarigan, Zeplin Jiwa Husada (2022) The Effect of Supplier Collaboration on Company Performance through Lean Manufacture and Inventory Control. [UNSPECIFIED]

Rahardjo, Jani (2014) Dampak Implementasi Penggunaan Teknologi Manufaktur Tingkat Lanjut -Advanced Manufacturing Technology pada Kinerja UKM di Indonesia. Jurnal Teknik Industri, 16 (1). ISSN 1411-2485

S

San, Gan Shu and Anggono, Juliana and Wahjudi, Didik and Tanoto, Yopi Yusuf and RANDY, and Hutasoit, Novana (2019) A Feasibility Study of Mobile Phone Casings Remanufacturing. [UNSPECIFIED]

Petra Christian University (2024) MEJA SAMPING TAMENG. .

Setiawan, Alexander IMPLEMENTASI APLIKASI DECISION SUPPORT SYSTEM DENGAN METODE ANALYTICAL HIERARCY PROCESS (AHP)UNTUK PENENTUAN JENIS SUPPLIER. Jurnal Gaung Informatika. (In Press)

Siagian, Hotlan and SETIABUDI, KEZIA JADE and Tarigan, Zeplin Jiwa Husada (2021) The role of affective leadership in improving firm performance through the integrated internal system and external integration FMCG Industry. [UNSPECIFIED]

Siagian, Hotlan and Tarigan, Zeplin Jiwa Husada (2021) The Impact of Top Management Commitment, Green Purchasing, and Supply Chain Management Practices on Operational Performance. [UNSPECIFIED]

Siagian, Hotlan and Tarigan, Zeplin Jiwa Husada (2020) Why Enterprise Resources Planning Technology Need on Logistics Integration and Retailer Satisfaction. [UNSPECIFIED]

Siagian, Hotlan and Tarigan, Zeplin Jiwa Husada and Basana, Sautma Ronni (2022) The role of top management commitment in enhancing competitive advantage: The mediating role of green innovation, supplier, and customer integration. [UNSPECIFIED]

Siagian, Hotlan and Tarigan, Zeplin Jiwa Husada and Hee, Han Tae (2018) The Role Of Buyer-Supplier Relationship in Enhancing The Influence of Top Management Involvement on Supply Chain Risk Management. In: International Conference on Management and Entrepreneurship 2018, 27-07-2018 - 27-07-2018, Yogyakarta - Indonesia.

Siagian, Hotlan and Tarigan, Zeplin Jiwa Husada and Andreani, Fransisca (2019) The Influence of Information Integration on Hotel Performance through the Green Operation and Strategic Purchasing. In: 2019 The 7th International Conference on Information Technology and Science , 18-06-2019 - 18-06-2019, Hongkong - Hongkong.

Siagian, Hotlan and Tarigan, Zeplin Jiwa Husada and Suprapto, Widjojo (2016) The Impacts of Implementing TQM, Personal Competence Management, and ERP in Improving Business Performance. In: The 26th International Conference on The Pacific Rim Management, 16-06-2016 - 16-06-2016, Taoyuan city - Taiwan.

Soesanto, Felix and Halim, Siana and Panjaitan, Togar Wiliater S. (2013) Garbage Trucks Routing in Surabaya. In: LSCM 2013, 27-06-2013 - , Kuta - Bali - Indonesia.

Petra Christian University (2021) Sistem Penilaian Kinerja Perguruan Tinggi Timbal Balik Berbasis Balanced Scorecard. .

Petra Christian University (2017) SISTIM DAN METODE PENILAIAN KINERJA PERGURUAN TINGGI TIMBAL-BALIK BERBASIS BALANCED SCORECARD. .

T

THERESIA, JULIET and Widyadana, I Gede Agus and Wahjudi, Didik (2019) Optimal Kiln Dry Allocation for Dry Timber Preparation to Minimize Cost. Jurnal Teknik Industri, 21 (1). pp. 43-48. ISSN 1411-2485

Tanoto, Yopi Yusuf and Anggono, Juliana and BUDIMAN, WESLEY and PHILBERT, KRESNA VINCENT (2020) STRENGTH AND DIMENSION ACCURACY IN FUSED DEPOSITION MODELING : A COMPARATIVE STUDY ON PARTS MAKING USING ABS AND PLA POLYMERS. Rekayasa Mesin, 11 (1). pp. 69-76. ISSN 2477-6041

Tanoto, Yopi Yusuf and Anggono, Juliana and Budiman , Wesley (2017) PROCESSING AND MATERIALS EFFICIENCY IN FUSED DEPOSITION MODELING: A COMPARATIVE STUDY ON PARTS MAKING USING ABS AND PLA POLYMERS. [UNSPECIFIED]

Tanoto, Yopi Yusuf and Anggono, Juliana and FEFE, (2021) Optimization of fused deposition modeling parameters for hips flexural strength with Taguchi method. [UNSPECIFIED]

Tanoto, Yopi Yusuf and San, Gan Shu and Wahjudi, Didik and Anggono, Juliana (2018) A Preliminary Study of Technical Feasibility for Mobile Phone Remanufacturing in Indonesia. [UNSPECIFIED]

Tanoto, Yopi Yusuf and San, Gan Shu and Wahjudi, Didik and PONTJONOTO, NIKO ADRISENNA and Suryajaya, Michael (2019) Process Planning Review for Mobile Phone Remanufacturing in Indonesia. [UNSPECIFIED]

Tanoto, Yopi Yusuf and Wahjudi, Didik and NJO, RICKY KURNIAWAN (2020) Proses Remanufaktur pada Komponen Otomotif. Jurnal Teknik Mesin, 17 (1). pp. 11-16. ISSN 1410-9867 print / 2656-3290 online

Tanoto, Yopi Yusuf and Anggono, Juliana and FEFE, (2020) OPTIMIZATION OF FUSED DEPOSITION MODELING PARAMETERS FOR HIPS FLEXURAL STRENGTH WITH TAGUCHI METHOD. In: International Conference on Mechanical Engineering Research and Application (iCOMERA), 08-10-2020 - 08-10-2020, Malang - Indonesia.

Tanoto, Yopi Yusuf and Anggono, Juliana and YOHANES, and Rahardjo, Cedric and Jonoadji, Ninuk (2024) The effects of printing orientation on the fused deposition modeling process of the robot gripper object-moving force. [UNSPECIFIED]

Tanoto, Yopi Yusuf and Anggono, Juliana and Yohanes, and Rahardjo, Cedric and Jonoadji, Ninuk (2021) THE EFFECTS OF PRINTING ORIENTATION ON THE FUSED DEPOSITION MODELING PROCESS OF THE ROBOT GRIPPER OBJECT-MOVING FORCE. In: nternational Conference on Automotive, Manufacturing, and Mechanical Engineering (IC-AMME), 02-10-2021 - 02-10-2021, Surabaya - Indonesia.

Tanoto, Yopi Yusuf and FEBRIAN, RONALDO and FILBERT, VINCENSIUS and SUGIARTO, NICHOLAS ADRIEL (2022) OPTIMASI MULTIRESPON PADA PROSES 3D PRINTING MATERIAL PLA DENGAN METODE TAGUCHI GREY. [UNSPECIFIED]

Tanoto, Yopi Yusuf and FILBERT, VINCENSIUS and FEBRIAN, RONALDO and SUGIARTO, NICHOLAS ADRIEL (2022) Optimasi Multirespon pada Proses 3D Printing Material ABS dengan Metode Taguchi-PCR Topsis. [UNSPECIFIED]

Tanoto, Yopi Yusuf and San, Gan Shu and Wahjudi, Didik and Anggono, Juliana (2017) A preliminary study of technical feasibility for mobile phone remanufacturing in Indonesia. In: International Conference on Electrical System Technology and Information, 29-09-2017 - 29-09-2017, Kuta, Badung, BAli - Indonesia.

Tarigan, Zeplin Jiwa Husada (2018) The Impact of Organization Commitment to Process and Product Innovation in Improving Operational Performance. [UNSPECIFIED]

Tarigan, Zeplin Jiwa Husada and Basana, Sautma Ronni (2012) Dampak Kompetensi Key user ERP terhadap Kinerja Inovasi dan Kinerja Kualitas Guna Meningkatkan Kinerja Organisasi. Jurnal Teknik Industri, 15 (1). pp. 41-50. ISSN ISSN 1411-2485 print / ISSN 2087-7439 online

Tarigan, Zeplin Jiwa Husada and Basana, Sautma Ronni and Suprapto, Widjojo (2018) Soft ERP and Hard ERP Implementation to the Integration System for Firm Performance. International Journal of e-Education, e-Business, e-Management and e-Learning (IJEEEE), 9 (1). pp. 26-37. ISSN 2010-3654

Tarigan, Zeplin Jiwa Husada and DAGMAR, AGIN VIAKRI (2021) The application of the Six Sigma method in reducing the defects of welding on the steel material. [UNSPECIFIED]

Tarigan, Zeplin Jiwa Husada and IVANDIANTO, GLESSER (2020) The Influence of Management Commitment towards Business Performance through Supply Chain Management and Customer Relationship Management. Journal of International Business and Economics, 8 (2). pp. 11-22. ISSN 2374-2208

Tarigan, Zeplin Jiwa Husada and JIPUTRA, JUAN ALEXANDER and Siagian, Hotlan (2021) The effect of supply chain practices on retailer performance with information technology as moderating variable. [UNSPECIFIED]

Tarigan, Zeplin Jiwa Husada and Lianto, and Basana, Sautma Ronni (2019) The Impact of Organizational Commitment in Upgrading ERP for Maintaining the Quality of Information towards the Performance. [UNSPECIFIED]

Tarigan, Zeplin Jiwa Husada and Sebayang, Firmanta (2021) The Effect of Purchasing Strategy Creativity and Supply Chain Practices on Business Performance. [UNSPECIFIED]

Tarigan, Zeplin Jiwa Husada and Sebayang, Firmanta and Panjaitan, Togar Wiliater Soaloon (2021) ERP compatibility on business performance through the inventory system and internal integration. [UNSPECIFIED]

Tarigan, Zeplin Jiwa Husada and Siagian, Hotlan (2019) THE EFFECT OF ENTERPRISE RESOURCE PLANNING ON COMPETITIVE ADVANTAGE. In: The 3rd International Conference on Management and Entrepreneurship 2019, 27-07-2019 - 27-07-2019, Phuket - Thailand.

Tarigan, Zeplin Jiwa Husada and Siagian, Hotlan (2020) The Effect of Enterprise Resource Planning Sustainability on Operational Performance through Planning and Control. International Journal of e-Education, e-Business, e-Management and e-Learning (IJEEEE), 10 (1). pp. 86-94. ISSN 2010-3654

Tarigan, Zeplin Jiwa Husada and Siagian, Hotlan (2019) The Impact of Information System Implementation to the Integrated System for Increasing the Supply Chain Performance of Manufacturing Companies. [UNSPECIFIED]

Tarigan, Zeplin Jiwa Husada and Siagian, Hotlan (2021) The effects of strategic planning, purchasing strategy and strategic partnership on operational performance. [UNSPECIFIED]

Tarigan, Zeplin Jiwa Husada and Siagian, Hotlan and Basana, Sautma Ronni and Jie, Ferry (2019) Effect of Key User Empowerment, Purchasing Strategy, Process Integration, Production System to Operational Performance. [UNSPECIFIED]

Tarigan, Zeplin Jiwa Husada and Siagian, Hotlan and Palumian, Yonathan and Sutapa, I Nyoman (2023) The influence of the human-machine interface on operational performance through supply chain agility. [UNSPECIFIED]

Tarigan, Zeplin Jiwa Husada and Siagian, Hotlan and Suprapto, Widjojo and Basana, Sautma Ronni (2019) The Effect of ERP Practice, SCM Practice, To Production Performance With IT Infrastructure. In: The 3rd International Conference on Management and Entrepreneurship 2019, 27-07-2019 - 27-07-2019, Phuket - Thailand.

Tarigan, Zeplin Jiwa Husada and Suprapto, Widjojo and Basana, Sautma Ronni (2017) The Influence of the Corporate Management Commitment in Building Organizational Culture and Cross-Funtional Integration to Improve Company�s Business Performance. International Journal of e-Education, e-Business, e-Management and e-Learning (IJEEEE), 7 (3). pp. 202-2011. ISSN doi: 10.17706/ijeeee.2017.7.3.202-211

Tarigan, Zeplin Jiwa Husada and Suprapto, Widjojo and Basana, Sautma Ronni (2019) The effect procedure change, TQM and ERP implementation to company performance on manufacturing industries. [UNSPECIFIED]

Tarigan, Zeplin Jiwa Husada and TANUWIJAYA, NOVIA CHANDRA and Siagian, Hotlan (2020) DOES TOP MANAGEMENT ATTENTIVENESS AFFECT GREEN PERFORMANCE THROUGH GREEN PURCHASING AND SUPPLIER COLLABORATION. [UNSPECIFIED]

Tarigan, Zeplin Jiwa Husada and Basana, Sautma Ronni (2013) The Influences of ERP Implementations to SCM in Increasing the Performance of East Java Manufacturing Companies from the AccountingFinancial Manager Perception. In: The 3rd International Forum Conference on Logistic and Supply Chain Management (LSCM), 27-06-2013 - 30-06-2013, Bali - Indonesia .

Tarigan, Zeplin Jiwa Husada and Siagian, Hotlan (2018) The Effect of Enterprise Resource Planning Sustainability on Operational Performance through Planning and Control Integration. In: 2nd World Conference on e-Education, e-Business and e-Commerce (WCEEE 2018), 27-06-2018 - 27-06-2018, Bali - Indonesia.

Tarigan, Zeplin Jiwa Husada and Suprapto, Widjojo and Basana, Sautma Ronni (2018) Effect of Procedure Change, TQM and ERP Implementation to Company Performance on Manufacturing Industries. In: International Conference on Material Science and Engineering in Jeju-island, 17-06-2018 - 17-06-2018, Jeju - South Korea.

Tarigan, Zeplin Jiwa Husada and Suprapto, Widjojo and Basana, Sautma Ronni (2013) Owner’s Commitment to the Planning and Controlling Processes to Improve Performance in Small and Medium Manufacturing Companies. In: The 3rd International Forum Conference on Logistic and Supply Chain Management (LSCM), 27-06-2013 - 30-06-2013, Bali - Indonesia.

Tulistyantoro, Lintu (2023) Kain Tenun “Petetan”. [UNSPECIFIED]

V

Vardai, Robert and Lummerstorfer, Thomas and Pretschuh, Claudia and Jerabek, Michael and Gahleitner, Markus and Bartos, Andras and Moczo, Janos and Anggono, Juliana and Pukanszky, Bela (2021) Improvement of the impact resistance of natural fiber–reinforced polypropylene composites through hybridization. [UNSPECIFIED]

W

WANGSAWIJAYA, KEVIN and Tanoto, Yopi Yusuf and Wahjudi, Didik and San, Gan Shu and Herlianto, Jonathan (2024) A Preliminary Study of Remanufacturing on FDM Machine. [UNSPECIFIED]

WIDJOJO, DAVIN SEBASTIAN and Sepadyati, Nova (2023) Peningkatan Layanan dan Minimasi Keluhan pada Pelayanan Transportasi Mobil Operasional di PT X. [UNSPECIFIED]

Wahjudi, Didik and San, Gan Shu and Anggono, Juliana and Tanoto, Yopi Yusuf (2018) FACTORS AFFECTING PURCHASE INTENTION OF REMANUFACTURED SHORT LIFE-CYCLE PRODUCTS. [UNSPECIFIED]

Wahjudi, Didik and San, Gan Shu and Tanoto, Yopi Yusuf and WINATA, JERRY (2020) Drivers and barriers of consumer purchase intention of remanufactured mobile phones: a study on Indonesian consumers. [UNSPECIFIED]

Wahjudi, Didik and Singgih, Moses L. and Suwignyo, Patdono and Baihaqi, Imam (2016) Product quality as competitive priority: Its relationship with total quality management implementation in Indonesia-SCOPUS version. 23rd International Conference for Production Research, ICPR 2015, 1 (1). p. 48. ISSN 24494984

Wahjudi, Didik and Singgih, Moses L. and Suwignyo, Patdono and Baihaqi, Imam (2016) The relationship between organisational culture and firm performance: an empirical study on Indonesian manufacturing firms. Int. J. Productivity and Quality Management, 18 (1). pp. 1-18. ISSN 1746-6482

Wahjudi, Didik and San, Gan Shu and Anggono, Juliana and Tanoto, Yopi Yusuf (2017) Factors Affecting Purchase Intention of Remanufactured Short Life-cycle. In: International Conference on Management & Entrepreneurship, 14-07-2017 - 14-07-2017, Denpasar - Indonesia.

Wahjudi, Didik and San, Gan Shu and Tanoto, Yopi Yusuf and WINATA, JERRY (2018) Drivers and Barriers of Consumer Purchase Intention of Remanufactured Mobile Phones: A Study on Indonesian Comsumers. In: 8th International Conference on Operations and Supply Chain Management, 12-09-2018 - 12-09-2018, Cranfield - United Kingdom.

Wahjudi, Didik and Singgih, Moses L. and Suwignyo, Patdono and Baihaqi, Imam (2014) The Impact of Power Distance and Individualism on Total Quality Management: An Empirical Research on Indonesian Manufacturing Firms. In: 6th International Conference on Operations and Supply Chain Management, 10-12-2014 - 12-12-2014, Denpasar, Bali - Indonesia.

Wee, Hui Ming and Widyadana, I Gede Agus (2013) Single-vendor single-buyer inventory model with discrete delivery order, random machine unavailability time and lost sales. International Journal of Production Economics, 143. pp. 574-579. ISSN 0925-5273

Wee , Hui Ming and Widyadana, Gede Agus (2012) Economic production quantity models for deteriorating items with rework and stochastic preventive maintenance time. International Journal of Production Research , 50 (11). pp. 2940-2952. ISSN 0020-7543 (Print), 1366-588X (Online)

Wee , Hui Ming and Widyadana, I Gede Agus (2013) Single-vendor single-buyer inventory model with discrete delivery order, random machine unavailability time and lost sales. International Journal of Production Economics. ISSN 0925-5273

Wee , Hui Ming and Widyadana, I Gede Agus (2013) A production model for deteriorating items with stochastic preventive maintenance time and rework process with FIFO rule. OMEGA, 41. pp. 941-954. ISSN 0305-0483

Wibowo, Mariana (2015) MENGENALI STRATEGI KEARIFAN PRODUKSI MEBEL DALAM MITIGASI GLOBAL WARMING. In: SEMINAR NASIONAL & CALL FOR PAPERS LINGKUNGAN HIDUP PERAN DAN KONTRIBUSI MASYARAKAT DALAM MITIGASI G, - 24-05-2008, Surabaya - Indonesia.

Petra Christian University (2023) Gantungan Pakaian Bis. .

Widyadana, Gede Agus and Wee , Hui Ming (2012) An economic production quantity model for deteriorating items with preventive maintenance policy and random machine breakdown. International Journal of Systems Science, 43 (10). pp. 1870-1882. ISSN 0020-7721

Widyadana, I Gede Agus and Wee, Hui Ming (2012) An economic production quantity model for deteriorating items with multiple production setups and rework. International Journal of Production Economics, 138. pp. 62-67. ISSN 0925-5273

Widyadana, I Gede Agus and Wee, Hui Ming (2010) An economic production quantity model for deteriorating items with preventive maintenance policy and random machine breakdown. International Journal of Systems Science, 43 (10). pp. 1870-1882. ISSN 0020-7721