Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General)"

UNSPECIFIED

ALOYSIUS, JONATHAN and SUMITO, JUAN ANTONIO and Prayogo, Doddy and Santoso, Hasan (2021) Optimization of concentrically braced steel frame structures based on SNI 1726:2019, SNI 1727:2020, SNI 1729:2020, and AISC 341-16. [UNSPECIFIED]

AMELIA, ELVINA and Natadjaja, Listia (2023) #50508#50500#50836? (Arayo?) Flashcard. [UNSPECIFIED]

ANSHEILLA, and WIJAYANTI, EVELYN JANE and Prayogo, Doddy and Tjong, Wong Foek (2021) A comparative study of several bio-inspired algorithms in cost optimization of cellular beams. [UNSPECIFIED]

Agustin, Karina and Soewandi, Hanijanto and Widjojo, Susan (2023) On the Weights for Characteristics and Comparables for Property Valuation using Quality Rating Valuation Estimation. [UNSPECIFIED]

Antoni, and AGRAPUTRA, AUDI and TEOPILUS, DANIEL and SUNARYO, AXELINO HADI and MULYADI, MALVIN MANUEL and Chandra, Jimmy and Pudjisuryadi, Pamuda and Hardjito, Djwantoro (2021) Investigation of the material mixtures and fiber addition for 3D concrete printing. [UNSPECIFIED]

Antoni, and ANDREAS, and CHRISTIAN, EDWIN and Hardjito, Djwantoro (2019) Using viscosity-modifying admixture to increase the cohesion of low-cement concrete mixture. [UNSPECIFIED]

Antoni, and CHRISTIAN, DAVID and WIBOWO, ALEXANDER RICARDO KOENTJORO and Chandra, Jimmy and Pudjisuryadi, Pamuda and Hardjito, Djwantoro (2022) Using Calcium Oxide and Accelerator to Control the Initial Setting Time of Mortar in 3D Concrete Printing. [UNSPECIFIED]

Antoni, and HARDI, ERIANTO and TANDEAN, RICKY DARIUS and Hardjito, Djwantoro (2019) Mix design of low-cement concrete with particle packing concept and superplasticizer application. [UNSPECIFIED]

Antoni, and HERIANTO, JASON GHORMAN and ANASTASIA, EVELIN and Hardjito, Djwantoro (2017) Effect of adding acid solution on setting time and compressive strength of high calcium fly ash based geopolymer. [UNSPECIFIED]

Antoni, and Hardjito, Djwantoro and Oswyn , K. Wattimena (2017) A Review on the Effect of Fly Ash Characteristics and Their Variations on the Synthesis of Fly Ash Based Geopolymer. [UNSPECIFIED]

Antoni, and KLARENS, KEVIN and INDRANATA, MICHAEL and Jamali, Luthfi Al and Hardjito, Djwantoro (2017) The use of bottom ash for replacing fine aggregate in concrete paving blocks. [UNSPECIFIED]

Antoni, and PURWANTORO, AUSTIN ADIPUTRA TAHIR and SUYANTO, WIDYA SARI PUSPA DEWI and Hardjito, Djwantoro (2019) Fresh and Hardened Properties of High Calcium Fly Ash-Based Geopolymer Matrix with High Dosage of Borax. [UNSPECIFIED]

Antoni, and SULISTIO, ALDI VINCENT and WAHJUDI, SAMUEL and Hardjito, Djwantoro (2017) Processed bottom ash for replacing fine aggregate in making high-volume fly ash concrete. [UNSPECIFIED]

Antoni, and WIDIANTO, ALVIN KRISNANTA and WIRANEGARA, JERRY LAKSMANA and Hardjito, Djwantoro (2017) CONSISTENCY OF FLY ASH QUALITY FOR MAKING HIGH VOLUME FLY ASH CONCRETE. [UNSPECIFIED]

Antoni, and YONATHAN, ALBERTUS and SURYO, HIERONIMUS ENRICO and THAMRIN, CHRISTOFFEL FELIO and GHOZALI, KURNIAWATI ESTER and Hardjito, Djwantoro (2019) Exploring the Potential of Low Cement Concrete through a Student Concrete Competition. [UNSPECIFIED]

Antoni, and ADI, NATHANAEL and KURNIAWAN, MARCELLINUS EVAN and AGRAPUTRA, AUDI and TEOPILUS, DANIEL and Pudjisuryadi, Pamuda and Chandra, Jimmy and Hardjito, Djwantoro (2023) The influence of viscosity-modifying agent and calcium carbonate on 3D printing mortar characteristics. [UNSPECIFIED]

Antoni, and HARTONO, FLORENTCIA and TANUWIJAYA, STEVEN and WIJAYA, KEVIN and Hardjito, Djwantoro (2021) Comprehensive Investigation on the Potential of Fly Ash from New Source as Construction Material. [UNSPECIFIED]

Antoni, and Kuncoro, Albert and FERNALDY, IVAN and DAVIAN, MATTHEW and Susanto, Tri Eddy and Hardjito, Djwantoro (2023) Potential of Local Clay for the Development of Limestone Calcined Clay Cement in East Java. [UNSPECIFIED]

Antoni, and SHENJAYA, STACIA DWI and LUPITA, MARIA and SANTOSA, SAMUEL and Wiyono, David and Hardjito, Djwantoro (2020) Utilization of Low Sulfur Fly Ash from Circulating Fluidized Bed Combustion Burner as Geopolymer Binder. [UNSPECIFIED]

Aysia, Debora Anne Yang and Palit, Herri Christian (2024) The Effect of Climbing Stairs Activity Toward Aerobic Fitness and Measurement of Its Energy Expenditure. [UNSPECIFIED]

Budhiyanto, Aris and Chiou, Yun-Shang (2024) Visual comfort and energy savings in classrooms using surveillance camera derived HDR images for lighting and daylighting control system. [UNSPECIFIED]

Budi, Gogot Setyo and CHANDRA, JOEL GLENN and ONGKOWARDHANA, BRYAN SAPUTRA and Husada, Willy (2024) Optimization of Counterfort Retaining Wall Structure with Shear Key using Metaheuristic Method. [UNSPECIFIED]

Budi, Gogot Setyo and tanaya, Levin Sergio (2022) The Effect of Welded Splice with Predetermined Gap of Concrete Spun Pile on The Response of Low Strain Integrity Test. [UNSPECIFIED]

CHANNIAGO, KENNY and Octavia, Tanti (2024) Designing a Proposed Scheduling Model in Logistics Company. [UNSPECIFIED]

CLARISSA, JESSELYN and Halim, Siana and Yahya, Bernardo Nugroho and Agustin, Karina and Sahputra, Iwan Halim (2021) A Policy Strategy Evaluation for Covid-19 Pandemic in the City of Surabaya using Vensim Ventana Dynamic System Simulation. [UNSPECIFIED]

Chandra, Jimmy and Chanthabouala, Khatthanam and Teng, Susanto (2018) Truss Model for Shear Strength of Structural Concrete Walls. [UNSPECIFIED]

Chandra, Jimmy and Pudjisuryadi, Pamuda and Antoni, (2021) Modeling and analysis of 3D-printed reinforced and prestressed concrete beams. [UNSPECIFIED]

Chandra, Jimmy and Pudjisuryadi, Pamuda and Antoni, and Wibowo, Hartanto (2020) Analytical modeling of 3D-printed reinforced concrete beams. [UNSPECIFIED]

Chandra, Jimmy and Teng, Susanto (2022) Simplified Strut-and-Tie Model for Shear Strength Prediction of Reinforced Concrete Low-Rise Walls. [UNSPECIFIED]

Chandra, Jimmy and CHRISTIAN, YONATHAN BILLY and ARDENLIE, FELIX GO and Ph.D., Hartanto Wibowo, S.T., M.A.Sc., (2023) Validation of nonlinear finite element model of reinforced concrete beams subjected to monotonic loading. [UNSPECIFIED]

Chandra, Jimmy and HALIM, ALVIN and FRANKY, and Pudjisuryadi, Pamuda and Antoni, (2024) Experimental Study of Bond Strength of Embedded Steel Reinforcement in Vibration-Based 3D Printed Concrete Mortar. [UNSPECIFIED]

Chandra, Jimmy and HANDOKO, JOHANNA and GUNAWAN, ANGELINE and Wibowo, Hartanto (2023) Nonlinear finite element analyses of reinforced concrete beam-column joints subjected to cyclic loading. [UNSPECIFIED]

Chandra, Jimmy and LOKITO, VITO NATHANIEL and TAMBUNA, JONATHAN AURELIUS (2023) Seismic Performance of Precast Concrete Special Moment Frames with Hybrid Connection System in Five and Ten Story Buildings. [UNSPECIFIED]

Chandra, Jimmy and MILLA, GATA and TAMBUNA, JONATHAN AURELIUS (2024) Evaluation of Shear-Flexure Interaction Behavior of Reinforced Concrete Wall. [UNSPECIFIED]

Chandra, Jimmy and Pudjisuryadi, Pamuda (2023) Flexural and Shear Behavior of 3D Printed Reinforced Concrete Beams: An Experimental Study. [UNSPECIFIED]

Chandra, Jimmy and Teng, Susanto (2020) Four Discussions from the September 2019 ACI Structural Journal. [UNSPECIFIED]

Chanthabouala, Khatthanam and Teng, Susanto and Chandra, Jimmy and Hai, Tan Kang and Ostertag, Claudia (2018) Punching Tests of Double-Hooked-End Fiber Reinforced Concrete Slabs. [UNSPECIFIED]

Cheng, Min-Yuan and Chiu, Yung-Fang and Chiu, Chien-Kuo and Prayogo, Doddy (2019) Risk-based maintenance strategy for deteriorating bridges using a hybrid computational intelligence technique: a case study. [UNSPECIFIED]

Cheng, Min-Yuan and Firdausi, Pratama Mahardika and Prayogo, Doddy (2014) High-performance concrete compressive strength prediction using Genetic Weighted Pyramid Operation Tree (GWPOT). [UNSPECIFIED]

Cheng, Min-Yuan and Prayogo, Doddy (2016) Modeling the Permanent Deformation Behavior of Asphalt Mixtures Using a Novel Hybrid Computational Intelligence. [UNSPECIFIED]

Cheng, Min-Yuan and Prayogo, Doddy and Wu, Yu-Wei (2019) A self-tuning least squares support vector machine for estimating the pavement rutting behavior of asphalt mixtures. [UNSPECIFIED]

Cheng, Min-Yuan and Prayogo, Doddy and Wu, Yu-Wei (2014) Novel Genetic Algorithm-Based Evolutionary Support Vector Machine for Optimizing High-Performance Concrete Mixture. [UNSPECIFIED]

Cheng, Min-Yuan and Prayogo, Doddy and Wu, Yu-Wei (2019) Prediction of permanent deformation in asphalt pavements using a novel symbiotic organisms search-least squares support vector regression. [UNSPECIFIED]

Cheng, Min-Yuan and Wibowo, Dedy Kurniawan and Prayogo, Doddy and Roy, Andreas F.V. (2015) Predicting productivity loss caused by change orders using the evolutionary fuzzy support vector machine inference model. [UNSPECIFIED]

Chun, Yoon-Young and Matsumoto, Mitsutaka and Chinen, Kenichiro and Endo, Hideki and San, Gan Shu and Tahara, Kiyotaka (2022) What will lead Asian consumers into circular consumption? An empirical study of purchasing refurbished smartphones in Japan and Indonesia. [UNSPECIFIED]

EDWARD, and Anastasia, Njo (2021) Prioritas Penghuni Terkait Perawatan Rumah Susun Sederhana Sewa di Surabaya. [UNSPECIFIED]

EFFENDY, KEVIN and Octavia, Tanti and Wijaya, Gunawan Budi (2021) Usage of Miniature Houses Built using Construction Materials in Engineering Educational Corporate Social Responsibility (CSR) Programs. [UNSPECIFIED]

EMANUEL, TIMOTHY and HADRIAN, and Prayogo, Doddy and Tjong, Wong Foek (2021) A comparative study of several nature-inspired algorithms in steel deck floor system cost optimization. [UNSPECIFIED]

Ezugwu, Absalom E. and Prayogo, Doddy (2018) Symbiotic Organisms Search Algorithm: theory, recent advances and applications. [UNSPECIFIED]

Felecia, and Halim, Siana and Tulistyantoro, Lintu and Wulandari, Dian (2018) Library Interior Design for Digital Native Generation. [UNSPECIFIED]

HANDOKO, JOHANNA and Tjong, Wong Foek (2023) Adaptive mesh refinements for analyses of 2D linear elasticity problems using the Kriging-based finite element method. [UNSPECIFIED]

HARSONO, KENNETH and Prayogo, Doddy and PRASETYO, KELVIN EKO and Tjong, Wong Foek and Tjandra, Daniel (2020) Comparative Study of Particle Swarm Optimization Algorithms in Solving Size, Topology, and Shape Optimization. [UNSPECIFIED]

HERRYANTO, and TANAYA, LEVIN SERGIO and Pudjisuryadi, Pamuda (2021) Alternative approach in Partial Capacity Design (PCD) by using predicted post-elastic story shear distribution. [UNSPECIFIED]

Hermawan, Surya (2022) ALAT PEMURNI AIR PAYAU PORTABEL MENGGUNAKAN ENERGI MANDIRI YANG DAPAT DIKENDALIKAN JARAK JAUH. [UNSPECIFIED]

Hermawan, Surya and Bangguna, David SVL and MIHARDJA, EDWIN and PRAJOGO, JESCEY EDLIN (2023) The Hydrodynamic Model Application for Future Coastal Zone Development in Remote Area. [UNSPECIFIED]

Hermawan, Surya and Gunawan, Handy (2018) High Spatial Grid Resolution of Hydrodynamic Numerical Modeling for Sea Current Energy Site Selection in Indonesia. [UNSPECIFIED]

Hermawan, Surya and HUIDIYANTO, DICKY and LIMANTARA, IVAN REYNALDI and MIHARDJA, EDWIN (2022) Brackish Water Treatment with Local Filter Media and Reverse Osmosis Using Application of Internet of Things Technology Brackish Water Treatment with Local Filter Media and Reverse Osmosis using Application of Internet of Things Technology. [UNSPECIFIED]

Hermawan, Surya and LAULITA, NASAR BUNTU (2023) Tender Selection Of Sustainable Suppliers During The Tender Process In The Mining Industry. [UNSPECIFIED]

Hermawan, Surya and MIHARDJA, EDWIN and PAMBUDI, DEVIAN ARYO and JASON, (2023) Hydrodynamic Model Optimization for Marine Tourism Development Suitability in Vicinity of Poso Regency Coastal Area, Central Sulawesi, Indonesia. [UNSPECIFIED]

Hermawan, Surya and SANJAYA, ALBERT JANITRA and WIJAYA, BOBBY HARTANTO and GABY, GRETEL (2020) Pemberdayaan Masyarakat Kampung Putat Jaya dengan Membangun Kolam Ikan Lele Jurnal. [UNSPECIFIED]

Hermawan, Surya and SUHENDRO, SAMUEL VITO and LIMWANTO, JAXON and RIADY, ELBERT GRAND and DEMORA, CALVIN and PATRICK, NICHOLAS (2023) Menjalin Kerjasama Dengan Pemuda Karangtaruna Untuk Meningkatkan Kualitas Lingkungan Jurnal. [UNSPECIFIED]

Hermawan, Surya and Tjahyana, Angela Jasmine Tanya (2023) Brackish Water Treatment With Sustainable Local Materials. [UNSPECIFIED]

Hermawan, Surya (2023) Designing Educational Facilities that Outrun Railways to be Inclusive, Safe, Resilient, and Sustainable. [UNSPECIFIED]

Hermawan, Surya (2020) Pemanfaatan dan Pengembangan Kelimpahan Sumber Daya Kelautan Indonesia Secara Berkelanjutan. [UNSPECIFIED]

Hermawan, Surya (2018) The Benefit of Decision Support System as Sustainable Environment Technology to Utilize Coastal Abundant Resources in Indonesia. [UNSPECIFIED]

Hermawan, Surya and HARSONO, KEVIN and BONG, NIGEL (2020) Sustainable Design for Passage Boat Ports in Remote Areas in Era Construction 4.0 at Sidoarjo East Java Indonesia. [UNSPECIFIED]

Hermawan, Surya and LAULITA, NASAR BUNTU (2023) Tender Selection Of Sustainable Suppliers During The Tender Process In The Mining Industry. [UNSPECIFIED]

Hermawan, Surya and Purnomo, Joko and Tjandra, Daniel (2018) THE SYNOPTIC DATA FOR ADAPTATION CLIMATE CHANGE IN SIDOARJO REGENCY EAST JAVA. [UNSPECIFIED]

Hermawan, Surya and Purnomo, Joko and Tjandra, Daniel (2018) THE USE OF UNMANNED AERIAL VEHICLES (UAV) FOR RECONSTRUCTION OF TOPOGRAPHY AND BATHYMETRY MAPS: CONSIDERATION FOR CIVIL CONSTRUCTION AGAINST COASTAL ADAPTATION DUE TO CLIMATE CHANGING. [UNSPECIFIED]

Hermawan, Surya and Purnomo, Joko and Tjandra, Daniel (2018) The Benefit of Wind Distribution Analysis for Coastal Construction Design in East Java Province. [UNSPECIFIED]

Hermawan, Surya and Tjahyana, Angela Jasmine Tanya (2023) Utilization of the Hydrodynamic Model to Determine the Movement Characteristics of Marine Debris in Karimata Islands Compare to Data Collection from Citizen Science Research. [UNSPECIFIED]

Hermawan, Surya and Tjahyana, Angela Jasmine Tanya and TIEWANTO, PENI and LIMANTARA, IVAN RICHARDIAN (2023) Brackish Water Treatment in Sidoarjo Area (East Java Indonesia) Using Reverse Osmosis (RO). [UNSPECIFIED]

Hermawan, Surya and Tjahyana, Angela Jasmine Tanya and TIEWANTO, PENI and LIMANTARA, IVAN RICHARDIAN and LIMANTARA, IVAN REYNALDI (2023) The Comparison of Brackish Water Treatment Using Local Filter Materials and Reverse Osmosis Filters. [UNSPECIFIED]

Hermawan, Surya and Tjahyana, Angela Jasmine Tanya and TOBING, ANSELL ALVERN and SUWARNO, REDDY VIRIYA (2023) Utilization of Hydrodynamic Models for Development of the Coastal Zone in Poso Regency. [UNSPECIFIED]

Hermawan, Surya and WINATA, SAM WAHYUDI (2023) Tender Evaluation Based on Contract Document. [UNSPECIFIED]

Hermawan, Surya and WINATA, SAM WAHYUDI (2023) Tender Evaluation Based on Contract Document. [UNSPECIFIED]

Hernando, Ivan Christian and WIDJAJA, JUAN ALBERT and SETIOPUTRO, MICHAEL VIERI (2024) Pengaruh Perbedaan Suhu Curing dan pH Cairan Pembersih Terhadap Ceramic Coating. [UNSPECIFIED]

Husada, Willy and Prayogo, Doddy and THAMRIN, CHRISTOFFEL FELIO and HERDJIJONO, RONALD (2021) Optimasi Desain Penampang Struktur Rangka Batang Baja Berbasis Reliabilitas Menggunakan Symbiotic Organisms Search dan Artificial Neural Network. [UNSPECIFIED]

JESICA, ANASTASIA and Pudjisuryadi, Pamuda (2023) Application of Soil Structure Interaction on Building with Basement using Nonlinear Soil Springs. [UNSPECIFIED]

Julistiono, Eunike Kristi (2017) Structural pattern’s granularity variation to optimize a vertical structure. [UNSPECIFIED]

Juniwati, Anik and Mintorogo, Danny Santoso and Handoyo, Ekadewi Anggraini (2021) Experimental study on ventilation using earth-to-air heat exchanger in Surabaya. [UNSPECIFIED]

Kuncoro, Albert (2023) ANALISIS PENGARUH VARIASI PENGGUNAAN BAHAN ADITIF TAMBAHAN SUPERPLASTICIZER TERHADAP PROPERTI PASTA KOMBINASI SEMEN-FLY ASH. [UNSPECIFIED]

Kuncoro, Albert and PARAMITHA, DEWANTI RATNA and MEOK, LYDIA YUNIARTI and Antoni, and Hardjito, Djwantoro (2023) ANALISIS PENGARUH VARIASI PENGGUNAAN BAHAN ADITIF TAMBAHAN SUPERPLASTICIZER TERHADAP PROPERTI PASTA KOMBINASI SEMEN-FLY ASH. [UNSPECIFIED]

Kusumastuti, Cilcia and GODE, DICKY and KURNIANTO, YOBELLA FEBE and Syaranamual, Frederik Jones (2021) Climate Change Impact in Flores Island, a Dry Region in Indonesia. [UNSPECIFIED]

MUKTIWIBOWO, SEBASTIAN ARIF and Anastasia, Njo (2024) Comparison of the property players preferences on housing prices in Surabaya. [UNSPECIFIED]

Muslikh, and Anggraini, N.K. and Hardjito, Djwantoro and Antonius, (2018) Behavior of Geopolymer Concrete Confined with Circular Hoops. [UNSPECIFIED]

NURHEMAN, KARINA ANGELICA and Octavia, Tanti (2019) Creating Value Stream Mapping for Process Improvement on Human Resource Function: An Industrial Case Study. [UNSPECIFIED]

Nugraha, Paulus and Andi, (2018) Studi Kasus Waste Material Proses Fabrikasi Struktur Baja di Perusahaan EPC (Engineering, Procurement, Construction). [UNSPECIFIED]

Octavia, Tanti and SIENERA, FARREL STEFAN (2022) A Simulation-based Optimization Approached to Design a Proposed Warehouse Layout on Bicycle Industry. [UNSPECIFIED]

Ongkowijoyo, Citra S. and Gurmu, Argaw and Andi, (2021) Investigating risk of bridge construction project: exploring Suramadu strait-crossing cable-stayed bridge in Indonesia. [UNSPECIFIED]

Palit, Herri Christian and Aysia, Debora Anne Yang (2024) The effect of body mass index and physical activity on recovery heart rate time post treadmill exercise. [UNSPECIFIED]

Pierezan, Juliano and Coelho, Leandro dos Santos and Mariani, Viviana Cocco and Segundo, Emerson Hochsteiner de Vasconcelos and Prayogo, Doddy (2021) Chaotic coyote algorithm applied to truss optimization problems. [UNSPECIFIED]

Prayogo, Doddy and HARSONO, KENNETH and PRASETYO, KELVIN EKO and Tjong, Wong Foek and Tjandra, Daniel (2020) Application of Metaheuristic Algorithms in Truss Structure Sizing Optimization. [UNSPECIFIED]

Prayogo, Doddy and HARSONO, KENNETH and PRASETYO, KELVIN EKO and Tjong, Wong Foek and Tjandra, Daniel (2021) Size, Topology, and Shape Optimization of Truss Structures using Symbiotic Organisms Search. [UNSPECIFIED]

Prayogo, Doddy and SEBASTIAN, and HAUWING, WILLIAM and Tjong, Wong Foek and Tjandra, Daniel (2020) Structural Design Optimization Using Particle Swarm Optimization and Its Variants. [UNSPECIFIED]

Prayogo, Doddy and Cheng, Min-Yuan and Tjong, Wong Foek and Tjandra, Daniel and Tran, Duc-Hoc (2018) Optimization model for construction project resource leveling using a novel modified symbiotic organisms search. [UNSPECIFIED]

Prayogo, Doddy and Cheng, Min-Yuan and Wu, Yu-Wei and Tran, Duc-Hoc (2019) Combining machine learning models via adaptive ensemble weighting for prediction of shear capacity of reinforced‑concrete deep beams. [UNSPECIFIED]

Prayogo, Doddy and GABY, GRETEL and WIJAYA, BOBBY HARTANTO and Tjong, Wong Foek (2020) Reliability-based Design with Size and Shape Optimization of Truss Structure Using Symbiotic Organisms Search. [UNSPECIFIED]

Prayogo, Doddy and SANTOSO, DAVID IMMANUEL and WIJAYA, DENNIS and GUNAWAN, TITANIA and WIDJAJA, JESSICA AGUSTINE (2020) Prediction of Concrete Properties Using Ensemble Machine Learning Methods. [UNSPECIFIED]

Prayogo, Doddy and Santoso, Hasan and FRANKY, and JASON, MARCELLINO (2022) Layout, Topology, and Size Optimization of Steel Frame Design Using Metaheuristic Algorithms: A Comparative Study. [UNSPECIFIED]

Prayogo, Doddy and Tjong, Wong Foek and SUGIANTO, STEVEN (2018) Enhanced symbiotic organisms search (ESOS) for global numerical optimization. [UNSPECIFIED]

Prayogo, Doddy and Tjong, Wong Foek and Tjandra, Daniel (2018) Prediction of High-Performance Concrete Strength Using a Hybrid Artificial Intelligence Approach. [UNSPECIFIED]

Pudjisuryadi, Pamuda and Antoni, and Chandra, Jimmy (2020) Review on 3D printed concrete as structural beam members. [UNSPECIFIED]

Pudjisuryadi, Pamuda and HALIM, ANDRE and KANDIAWAN, ALEXANDER KEITH and Lumantarna, Benjamin (2020) Improving Seismic Performance of Structure with Semi-rigid floor using VSL-Gensui Damper. [UNSPECIFIED]

Pudjisuryadi, Pamuda and Lumantarna, Benjamin (2021) Performance of Six- and Ten-story Reinforced Concrete Buildings Designed by using Modified Partial Capacity Design (M-PCD) Method with 70% Shear Force Ratio. [UNSPECIFIED]

Pudjisuryadi, Pamuda and Lumantarna, Benjamin (2021) Seismic Performance of a Three-Story Reinforced Concrete Building with Masonry Infill Walls and Friction Base Support. [UNSPECIFIED]

Pudjisuryadi, Pamuda (2023) Application of modified partial capacity design on six-story Lshaped reinforced concrete buildings with variations on elastic columns configurations. [UNSPECIFIED]

Pudjisuryadi, Pamuda and Lumantarna, Benjamin (2022) Application of Modified-Partial Capacity Design Method on 6- and 15-story Square Buildings with Variation in number of Elastic Columns. [UNSPECIFIED]

Purnomo, Joko and Chandra, Jimmy (2020) Evaluation of a Macro Lump Plasticity Model for Reinforced Concrete Beam-Column Joint under Cyclic Loading. [UNSPECIFIED]

Purnomo, Joko and Han, Aylie and Gan, Buntara Sthenly and Hardjito, Djwantoro (2023) The effects of various parameters in sensitivity analysis of plain concrete beam using rigid body spring model. [UNSPECIFIED]

RENATA, IVAN and Halim, Siana (2018) Solving real problem in plastic industry: A case in trim-loss problems. [UNSPECIFIED]

Reynaldo, Ambrosius Matthew Junius and Prayogo, Doddy and THENDEAN, RICHARD CHRISTIAN and FREANDO, IMANNUEL MICHRAGA (2024) Optimasi Penjadwalan Proyek Kantor PT.X dengan Konsep Finance Based Scheduling dan Metode Metaheuristik. [UNSPECIFIED]

SANTOSA, SAMUEL and Antoni, and Hardjito, Djwantoro (2024) Enhancing Compressive Strength of Very High Volume Fly Ash Concrete Using Low Molarity Alkali Solution and Thermal Activation. [UNSPECIFIED]

SUSANTO, SOFIAN ARIF and Antoni, and Hardjito, Djwantoro (2021) Review of autonomous self-healing cementitious material. [UNSPECIFIED]

San, Gan Shu (2019) The Conceptual Framework of Information Technology Adoption Decision-making in a Closed-loop Supply Chain. [UNSPECIFIED]

San, Gan Shu and Halim, Siana and Aysia, Debora Anne Yang and LESTARI, JESSIE (2023) Predicting Willingness to Donate Smartphones as a Reuse Option Using Decision Tree Analysis. [UNSPECIFIED]

San, Gan Shu and Pujawan, I Nyoman and Suparno, and Widodo, Basuki (2017) Pricing decision for new and remanufactured product in a closed-loop supply chain with separate sales-channel. [UNSPECIFIED]

San, Gan Shu and Pujawan, I Nyoman and Suparno, and Widodo, Basuki (2018) Pricing decisions for short life-cycle product in a closed-loop supply chain with random yield and random demands. [UNSPECIFIED]

San, Gan Shu and Pujawan, I Nyoman and Wahjudi, Didik and Tanoto, Yopi Yusuf (2019) Pricing decision model for new and remanufactured short life-cycle products with green consumers. [UNSPECIFIED]

San, Gan Shu and Halim, Siana (2024) Hierarchy of End-of-use Options: Smartphones Reuse to Support Online Learning During COVID-19 Pandemic in Indonesia. [UNSPECIFIED]

San, Gan Shu and Halim, Siana and ANGGRAINI, DELLA SUCI (2024) Hierarchy of reuse options in smartphone selection and strategies to support circular economy. [UNSPECIFIED]

San, Gan Shu and Pujawan, I Nyoman and Suparno, and Widodo, Basuki (2015) Pricing Decision Model for Short Life-cycle Product in a Closed-loop Supply Chain with Remanufacturing. [UNSPECIFIED]

Sutapa, I Nyoman and Panjaitan, Togar Wiliater Soaloon and Rahardjo, Jani (2016) Measuring the Usage Level of the IE Tools in SMEs Using Malcolm Baldrige Scoring System. [UNSPECIFIED]

TANAYA, LEVIN SERGIO and HERRYANTO, and Pudjisuryadi, Pamuda (2021) Modified Partial Capacity Design (M-PCD): achieving partial sidesway mechanism by using two steps design approach. [UNSPECIFIED]

TANPUTERA, ANTHONY GUNAWAN and Palit, Herri Christian and Aysia, Debora Anne Yang (2024) The Rate of Student�s Academic Burnout During Covid-19 Pandemic. [UNSPECIFIED]

Tanuwidjaja, Gunawan and Mustakim, (2022) SUSTAINABLE TOURISM AND HOUSING DEVELOPMENT FOR PANGGANG ISLAND, SERIBU ISLANDS JAKARTA: LEARNING FROM MALDIVES SUSTAINABLE TOURISM DEVELOPMENT. [UNSPECIFIED]

Tavio, and Pudjisuryadi, Pamuda and Honestyo, Aoron (2024) Stress-Strain Model of Concrete Columns Externally Collared with Steel Angles Subjected to Axial Compression. [UNSPECIFIED]

Tejani, Ghanshyam G. and Pholdee, Nantiwat and Bureerat, Sujin and Prayogo, Doddy (2018) Multiobjective adaptive symbiotic organisms search for truss optimization problems. [UNSPECIFIED]

Tejani, Ghanshyam G. and Pholdee, Nantiwat and Bureerat, Sujin and Prayogo, Doddy and Gandomi, Amir H. (2019) Structural optimization using multi-objective modified adaptive symbiotic organisms search. [UNSPECIFIED]

Tjandra, Daniel and Sugiharto, Handoko and Buntoro, Januar and Wulandari, Paravita Sri (2021) Potential damage to residential building due to adjacent surcharge fill loading-case studies in Surabaya, Indonesia. [UNSPECIFIED]

Tjandra, Daniel and Wulandari, Paravita Sri (2023) DAMPAK NEGATIF PROYEK PEMBANGUNAN RUMAH TINGGAL TERHADAP BANGUNAN DI SEKITARNYA � STUDI KASUS DI SURABAYA. [UNSPECIFIED]

Tjandra, Daniel and Wulandari, Paravita Sri (2019) The shear strength alteration on clay soil considering the plasticity index and the percentage of fine aggregates in tropical climate regions. [UNSPECIFIED]

Tjong, Wong Foek and SOETANTO, RICHO MICHAEL and Budiman, Januar (2018) On the accuracy and convergence of the hybrid FE-meshfree Q4-CNS element in surface fitting problems. [UNSPECIFIED]

Tjong, Wong Foek and SULISTIO, ADAM and SYAMSOEYADI, HIDAYAT (2017) Kriging-Based Timoshenko Beam Elements with the Discrete Shear Gap Technique. [UNSPECIFIED]

Tjong, Wong Foek and GUNAWAN, JUNIUS (2024) Locking-Free Kriging-Based Curved Beam Elements with the Discrete Strain Gap Technique. [UNSPECIFIED]

Tjong, Wong Foek and GUNAWAN, JUNIUS (2024) Locking-Free Kriging-Based Curved Beam Elements with the Discrete Strain Gap Technique. [UNSPECIFIED]

Tjong, Wong Foek and Prayogo, Doddy and PUTRA, REINARD EKA and JOSEPH, JAN (2020) Member sizing optimization of large scale steel space trusses using a symbiotic organisms search algorithm. [UNSPECIFIED]

Tjong, Wong Foek and SANTOSO, STEVANUS WONGSO and SUTRISNO, MELLYSSA (2022) Locking-free Kriging-based Timoshenko Beam Elements using an Improved Implementation of the Discrete Shear Gap Technique. [UNSPECIFIED]

Tjong, Wong Foek and TANOYO, NELVIN and GOSARIA, TONNY CHRISTANTO (2024) Free-vibration and buckling analyses of beams using Kriging-based Timoshenko beam elements with the discrete shear gap technique. [UNSPECIFIED]

WATTIMENA, OSWYN KARSTEN and Antoni, and SURJA, REINER TIRTAMULYA and MINTURA, RICARD and Hardjito, Djwantoro (2019) Cooling Treatment of Alkali Solution to Prolong the Setting Time of High Calcium Fly Ash Based Geopolymers. [UNSPECIFIED]

WATTIMENA, OSWYN KARSTEN and Antoni, and Hardjito, Djwantoro (2023) Long-term Mechanical Properties and Microstructure of Concrete Utilizing Self-Cementing Fly Ash as A Sole Binder Material. [UNSPECIFIED]

WATTIMENA, OSWYN KARSTEN and Antoni, and Hardjito, Djwantoro (2022) PROPERTIES OF CONCRETE UTILIZING SELF-CEMENTING HIGH-CALCIUM FLY ASH AS SOLE BINDER MATERIAL. [UNSPECIFIED]

Wahjudi, Didik and San, Gan Shu and Tanoto, Yopi Yusuf and WINATA, JERRY (2020) Drivers and barriers of consumer purchase intention of remanufactured mobile phones: a study on Indonesian consumers. [UNSPECIFIED]

Wallah, Steenie Edward and Hardjito, Djwantoro (2015) Assessing the shrinkage and creep of alkali-activated concrete binders. [UNSPECIFIED]

Wulandari, Paravita Sri and Tjandra, Daniel (2021) The effect of crumb rubber in dense graded and open graded cold mixture asphalt. [UNSPECIFIED]

Wulandari, Paravita Sri and JOHNSON, and SANTOSO, LEONARDO and KRISTIANTO, YUDDY and BILLY, MOURICE (2023) A Laboratory Study on Open and Dense Graded Cold Asphalt Emulsion Mixtures for Surface Courses. [UNSPECIFIED]

Wulandari, Paravita Sri and LESTYANA, HANSEN RICHARDO and JOHNSON, and TRANGGONO, JASON FRAN (2021) Sustainable road-kill mitigation in Gladak Perak Bridge at Lumajang, Indonesia. [UNSPECIFIED]

Wulandari, Paravita Sri and Tjandra, Daniel (2024) Research Article The Effect of Aggregate Gradations Limit on Dense Graded Cold Mixture Asphalt. [UNSPECIFIED]

Article

Abdul Razak, Rafiza and Al Bakri, Mustafa and Kamarudin, H. and Khairul Nizar, I, and Hardjito, Djwantoro and Zarina, Y (2013) Reviews on the Properties of Aggregates made with or without Geopolymerisation Method. Advanced Materials Research, 626 (2013). pp. 892-895.

Al Bakri, A. M. Mustafa and WATTIMENA, OSWYN KARSTEN and Hardjito, Djwantoro and Rafiza, A. R. (2013) Improving Surface Durability of High Volume Fly Ash Concrete with Application of Alkali Solution. Advanced Materials Research, 626 (2013). pp. 636-640.

Anastasia, Njo and Kwanda, Timoticin and WIDJAJA, DICKY FREDY (2018) Pengaruh Perawatan Prasarana, Sarana, dan Utilitas terhadap Kepuasan Penghuni pada Kawasan Perumahan di Surabaya. Jurnal Tesa Arsitektur, 16 (1). na. ISSN ISSN cetak 1410-6094 | ISSN online 2460-6367

Andi, and SUMALI, STEPHEN HANS and LIMANSANTOSO, GIOVANNI FERDINAND (2022) The Impact of Contractor Safety Leadership on Workers Safety Behavior. Civil Engineering Dimension, 24 (2). pp. 93-100. ISSN 1410-9530

Andriono, Takim and Tjong, Wong Foek (2002) Aplikasi Konsep Berbasis Perpindahan pada Perencanaan Pilar Beton Bertulang untuk Struktur Jembatan. Dimensi Teknik Sipil, 4 (2). pp. 51-59. ISSN 1410-9530

Antoni, and CHANDRA, LUCKY and Hardjito, Djwantoro (2015) The impact of using fly ash, silica fume and calcium carbonate on the workability and compressive strength of mortar. Procedia Engineering, 125 (125). p. 779. ISSN 1877-7058

Antoni, and GEMAN, RUDINI and TJONDRO, RIOVANDI TRESDIONO and Anggono, Juliana and Hardjito, Djwantoro (2013) Effects of Calcination Temperature of LUSI Mud on the Compressive Strength of Geopolymer Mortar. Advanced Materials Research, 2013. pp. 224-228.

Antoni, and HALIM, JAMES GABRIEL and KUSUMA, OWEN CHANDRA and Hardjito, Djwantoro (2017) Optimizing polycarboxylate based superplasticizer dosage with different cement type. Procedia Engineering, 171 (2017). pp. 752-759. ISSN 1877-7058

Antoni, and SATRIA, JUAN and SUGIARTO, AGUNG and Hardjito, Djwantoro (2017) Effect of Variability of Fly Ash Obtained from the Same Source on the Characteristics of Geopolymer. MATEC Web of Conferences, 97 (01026). pp. 1-6. ISSN 2261-236X

Antoni, and SATRYA, VINDY and Hardjito, Djwantoro (2015) Simple Mechanical Beneficiation Method of Coarse Fly Ash with High LOI for Making HVFA Mortar. Civil Engineering Dimension, 17 (1). pp. 38-43. ISSN 1979-570X

Antoni, and WIBAWA, HENDRA SURYA and Hardjito, Djwantoro (2018) Influence of Particle Size Distribution of High Calcium Fly Ash on HVFA Mortar Properties. Civil Engineering Dimension, 20 (2). pp. 51-56. ISSN 1410-9530

Antoni, and WIJAYA, STEPHEN WIBIATMA and Hardjito, Djwantoro (2015) Compressive Strength of Geopolymer Based on the Fly Ash Variation. Materials Science Forum, 841 (841). pp. 98-103. ISSN 1662-9752

Antoni, and WIJAYA, STEPHEN WIBIATMA and Hardjito, Djwantoro (2015) Factors Affecting the Setting Time of Fly Ash-Based Geopolymer. Materials Science Forum, 841 (841). pp. 90-97. ISSN 1662-9752

Antoni, and WIJAYA, STEPHEN WIBIATMA and SATRIA, JUAN and SUGIARTO, AGUNG and Hardjito, Djwantoro (2016) The Use of Borax in Deterring Flash Setting of High Calcium Fly Ash Based Geopolymer. Materials Science Forum, 857 (2016). pp. 416-420. ISSN 1662-9752

Antoni, and WIYONO, DAVID and VIANTHI, AGIE and PRASETIO, PERMANA PUTRA and KARTADINATA, GARY and Hardjito, Djwantoro (2014) Effect of Particle Size on Properties of Sidoarjo Mud-based Geopolymer. Materials Science Forum, 803 (2015). pp. 44-48. ISSN 1662-9752

Antoni, Antoni and Geman, Rudini and Tjondro, Riovandi and Anggono, Juliana and Hardjito, Djwantoro Effects of Calcination Temperature of LUSI Mud on the Compressive Strength of Geopolymer Mortar. Advanced Materials Research, 626 (2013). pp. 224-228.

Antoni, Antoni and Wattimena, Oswyn and Hardjito, Djwantoro (2013) Improving Surface Durability of High Volume Fly Ash Concrete with Application of Alkali Solution. Advanced Materials Research, 626 (2013). pp. 636-640.

Antoni, and GUNAWAN, RIANTO and Hardjito, Djwantoro (2015) Rapid Indicators in Detecting Variation of Fly Ash for Making HVFA Concrete. Applied Mechanics and Materials, 815 (815). pp. 153-157. ISSN 1662-7482

Budi, Gogot Setyo and WIJAYA, JOSHUA and SIKOMENA, EVAN FILBERT and Koentjoro, Hurijanto (2019) The attenuation coefficient of barite concrete subjected to gamma-ray radiation. MATEC Web of Conferences. International Conference on Sustainable Civil Engineering Structures and Construction Materials, 258 (201925). pp. 1-6. ISSN eISSN: 2261-236X

Budi, Gogot Setyo (2017) Settlement of Residential Houses Supported by Piled Foundation Embedded in Expansive Soil. Procedia Engineering, 171 (1). pp. 454-460. ISSN 1877-7058

Budi, Gogot Setyo and KOSASI, MELISA and WIJAYA, DEWI HINDRA (2015) Bearing Capacity of Pile Foundations Embedded in Clays and Sands Layer Predicted Using PDA Test and Static Load Test. Procedia Engineering, 125 (Proced). pp. 406-410. ISSN 1877-7058

Budi, Gogot Setyo and Tandiputra, Alvin Gilbert and Markho, Haven Kusuma (2019) The Correlation between Penetration Pressure Required to Install Pile Foundation and to Insert Bi-cones In Cone Penetration Test. Civil Engineering Dimension, 21 (1). pp. 13-18. ISSN ISSN 1410-9530 print / ISSN 1979-570X online

Budi, Gogot Setyo and Tantri, Gondo Wibowo (2017) Heave induced reduction of friction capacity of pile embedded in clays. MATEC Web of Conferences. Sriwijaya International Conference on Engineering, Science and Technology , 101 (15). pp. 1-5. ISSN DOI: https://doi.org/10.1051/matecconf/201710104023

Budi, Gogot Setyo and Winata, Stefanus Kurniawan and Suseno, Prasetyo Kurniawan (2017) Spinning Induced Compression Strength of Precast Hollow Concrete Piles. Civil Engineering Dimension, 19 (2). pp. 99-104. ISSN ISSN 1410-9530 print / ISSN 1979-570X online

Chandr, Herry Pintardi and Indarto, and Wiguna, I Putu Artama and Koming, Peter F. Model of Stakeholder Influence on Project Success: Finding from Construction Project in East Java. International Journal of Academic Research, 4 (2). pp. 41-45. ISSN 2075-4124

Chandra, Herry Pintardi and Indarto, and Wiguna, I Putu Artama and Kaming, Peter F. (2012) Stakeholders Influence for Successful Project Performance. International Journal of Academic Research, 4 (2). pp. 41-45. ISSN 2075-4124

Chandra, Herry Pintardi and Indarto, Indarto and Wiguna, I Putu Artama and Kaming, Peter F. Impact of Stakeholder Psychological Empowerment on Project Success. Journal for Technology and Sicience, IPTEK, 22 (2). pp. 65-73. ISSN 0853-4098

Chandra, Jimmy and Warnitchai, Pennung (2011) Application of Buckling Restrained Braces for Seismic Strengthening of Irregular Gravity Load Designed Reinforced Concrete Frame Buildings. Civil Engineering Dimension, 13 (2). pp. 65-74. ISSN ISSN 1410-9530 print / ISSN 1979-570X online

Cheng, Min-Yuan and Prayogo, Doddy and Tran, Duc-Hoc (2016) Optimizing Multiple-Resources Leveling in Multiple Projects Using Discrete Symbiotic Organisms Search. Journal of Computing in Civil Engineering, 30 (3). 04015036. ISSN 08873801

Cheng, Min-Yuan and Prayogo, Doddy (2017) A novel fuzzy adaptive teaching–learning‑based optimization (FATLBO) for solving structural optimization problems. Engineering with Computers, 33 (1). pp. 55-69. ISSN 0177-0667

Cheng, Min-Yuan and Prayogo, Doddy and Ju, Yi-Hsu and Wu, Yu-Wei and Sutanto, Sylviana (2016) Optimizing mixture properties of biodiesel production using genetic algorithm-based evolutionary support vector machine. International Journal of Green Energy , 13 (15). pp. 1599-1607. ISSN 15435075

Cilcia, Kusumastuti and Sutat, Weesakul (2015) Extreme Rainfall Indices for Tropical Monsoon Countries in Southeast Asia. Civil Engineering Dimension, 16 (2). pp. 112-116. ISSN 1410-9530

GOENAWAN, VERRYANTO and Antoni, and Hardjito, Djwantoro (2015) A Preliminary Study on Cracking Tendency of Cement Paste Incorporating High Calcium Fly Ash. Applied Mechanics and Materials, 815 (815). pp. 158-163. ISSN 1662-7482

GUNAWAN, HANDY and Budi, Gogot Setyo (2017) Kajian Emisi Kendaraan di Persimpangan Surabaya Tengah dan Timur serta Potensi Pengaruh terhadap Kesehatan Lingkungan Setempat. Jurnal Wilayah Dan Lingkungan, 5 (2). 113 - 124. ISSN P-ISSN: 2338-1604 dan E-ISSN: 2407-8751

Hardjito, Djwantoro (2001) Abu Terbang Solusi Pencemaran Semen. SINAR HARAPAN.

Hardjito, Djwantoro (2002) Geopolimer Beton Tanpa Semen yang Ramah Lingkungan. KOMPAS.

Hardjito, Djwantoro and Antoni, and KOEAN, GUNADI MULIA WIBOWO and CHRISTIANTO, DANNY (2012) Pozzolanic Activity Assessment of LUSI (LUmpur SIdoarjo) Mud in Semi High Volume Pozzolanic Mortar. Materials, 5 (9). pp. 1654-1660. ISSN 1996-1944

Hardjito, Djwantoro and Antoni, Antoni and Wibowo, Gunadi M and Christianto, Danny (2012) Pozzolanic Activity Assessment of LUSI (LUmpur SIdoarjo) Mud in Semi High Volume Pozzolanic Mortar. Materials, 5 (9). pp. 1654-1660. ISSN 1996-1944

Hardjito, Djwantoro (2018) Indonesia Darurat Mitigasi Gempa. Indonesia Darurat Mitigasi Gempa.

Hardjito, Djwantoro (2024) Magnitudo, MMI, dan Mitigasi Dampak Gempa. Magnitudo, MMI, dan Mitigasi Dampak Gempa.

Hardjito, Djwantoro (2018) Mitigasi Gempa Upaya Mencegah Jatuhnya Korban. Mitigasi Gempa Upaya Mencegah Jatuhnya Korban.

Hardjito, Djwantoro (2012) Saatnya Berguru ke Malaysia? Saatnya Berguru ke Malaysia?.

Hardjito, Djwantoro and Antoni, (2014) Potentials of LUSI Volcanic Mud as Construction Materials. Asian Bulletin of Engineering Science and Technology, 1 (1). pp. 1-6.

Hermawan, Surya and LIMANTARA, IVAN REYNALDI and STEVEN, DANIEL and FERNALDI, JASON (2023) A Practical Implementation of Brackish Water Treatment with Local Material in Sidoarjo Regency, East Java, Indonesia. Civil Engineering Dimension, 25 (1). pp. 53-75. ISSN 1410-9530

Hermawan, Surya and Syafrani, Syafrani (2015) An Integrated Decision Support System (DSS) for the Management of Sustainable Mariculture in Indonesia. Advances in Environmental Biology, 9 (7). pp. 21-27. ISSN 19950756

Hermawan, Surya and Wijaya, Gunawan Budi (2019) The New Design Criteria For Steel Construction Concerning Occupational Health And Safety. Buletin Profesi Insinyur, 2 (2). 051- 055. ISSN 2654-5926

Ima , Muljati and Lumantarna, Benjamin and Reynaldo, P. Intan and Arygianny, Valentino (2017) Performance of Direct Displacement Based Design on Regular Concrete Building Against Indonesian Response Spectrum. Procedia Engineering, 171 (1). 1019–1024. ISSN 1877-7058

Kanok-Nukulchai, Worsak and Tjong, Wong Foek and W, Sommanawat (2015) A Geralization of FEM using Node-based Shape Functions. Civil Engineering Dimension, 17 (3). pp. 152-157. ISSN 1979-570X

Kanok-Nukulchai, Worsak and Tjong, Wong Foek (2008) A Break-Through Enhancement of FEM Using Node-Based Kriging Interpolation. IACM Expressions, 23 (1). pp. 24-29.

Kuncoro, Albert and Antoni, and Hardjito, Djwantoro and Tanojo, Effendy (2023) Evaluation of bonding performance of ultra high-performance concrete with fly ash content as overlay on normal strength concrete. The 8th International Conference of EACEF 2022, 1195 (1195). 012020. ISSN 10.1088/1755-1315/1195/1/012020

Kusumastuti, Cilcia and Chandra, Herry Pintardi and WIBISONO, KRISTANTO and HARTONO, ANTONIUS CHRISTOPHER (2019) Eco Drainage System for Surface Runoff Reduction in Indonesia. Civil Engineering Dimension, 21 (1). 29 - 35. ISSN 1410-9530

Kusumastuti, Cilcia and Djajadi, Ruslan and Rumihin, Angel (2015) Evaluation of Drainage Channels Capacity in Ambon City: A Case Study on Wai Batu Merah Watershed Flooding. Procedia Engineering, 125 (2015). 263 - 269. ISSN 1877-7058

Kusumastuti, Cilcia and Sudjarwo, Prasetio and CHRISTHIE, MARVIN and KRISNA, TIMOTIUS (2019) Intensity-Duration-Frequency (IDF) Curve and the Most Suitable Method to Determine Flood Peak Discharge in Upper Werba Sub-Watershed. Civil Engineering Dimension, Vol 21 (No 2 (). pp. 70-75. ISSN 1979-570X

LIBIANTO, TABITA TANIA and Andi, and Arijanto, Lie (2016) Pengembangan indeks biaya konstruksi rumah sejahtera murah di beberapa daerah di Indonesia. Jurnal Media Teknik Sipil, 14 (2). pp. 215-226. ISSN 1693-3095

Limanto, Sentosa (2009) Evaluasi Pemanfaatan Alat Pemompa Beton Pada Pengecoran Lantai Dasar. Jurnal Ilmiah Desain & Konstruksi, 8 (2). pp. 107-113. ISSN ISSN 0216-4086

Limanto, Sentosa and Chandra, Herry Pintardi (2010) Risk Management Operational In Readymix Concrete Industry. Dinamika Teknik Sipil, 10 (1). pp. 67-72. ISSN 1411-8904

Limanto, Sentosa and Chandra, Herry Pintardi (2014) Trust to Contractor in Housing Construction. Civil Engineering Dimension, 19 (1). pp. 51-55. ISSN 1410-9530

Limanto, Sentosa and Johanes Indrojono , Suwono (2015) Beam Column and footings connection of simple prefab housing. Procedia Engineering, 125 (875 K). pp. 838-842. ISSN 1877-7058

Limanto, Sentosa and Kusuma, Jonathan H. and Untoyo , Andy and Pelangi, Herri (2009) Theory of Constraints of Construction Management of Housing Development in Surabaya. Jurnal SAINTEK, 6 (1). pp. 23-28. ISSN 1693-8917

Limanto, Sentosa and Kusuma, Jonathan H. and Untoyo W., Andy and P.S., Herri Teori Kendala dalam Manajemen Konstruksi Khususnyadi Bidang Pelaksanaan Pembangunan Perumahan di Surabaya. Jurnal SAINTEK, 6 (1). pp. 23-28. ISSN 1693-8917

Limanto, Sentosa and Patmadjaja, Harry and Gunawan, Jeksen and Wanngsa Putra, Eric (2011) Evaluasi Produktivitas Pemasangan Bata Beton Ringan Untuk Pekerjaan Dinding Pada Bangunan Hotel. Environmantal Talk: Toward A Better Green Living. CM57-CM66. ISSN ISBN: 978-602-98849-0-6

Limanto, Sentosa and Suwono, Johanes Indrojono (2015) Beam column and footings connection of simple prefab housing. Procedia Engineering, 125 (2015). pp. 838-842. ISSN 1877-7058

Lumantarna, Benjamin and Pudjisuryadi, Pamuda Learning from Local Wisdom: Friction Damper in Traditional Building. Civil Engineering Dimension.

Lumantarna, Benjamin and Pudjisuryadi, Pamuda (2012) Learning from Local Wisdom: Friction Damper in Traditional Building. Civil Engineering Dimension.

Lumantarna, Benjamin and Pudjisuryadi, Pamuda and Soetanto, R.M. and Hindrajana, G.G. (2017) Local wisdom to a sustainable non-engineered brick building. Procedia Engineering, 171 (1). pp. 159-167. ISSN 1877-7058

Maer, Bisatya Widadya and Pudjisuryadi, Pamuda (2015) SANTEN-fuse AS ANEARTHQUAKE DAMPER FOR PENDOPO JOGLO. Dimensi, 42 (1). pp. 1-8. ISSN 0126-219X

Mustafa Al Bakri, A. M. and Rafiza, A.R. and Hardjito, D. and Kamarudin, H. and Khairul Nizar, I, (2012) Characterization of LUSI Mud as Geopolymer Raw Material. Advanced Materials Research, 548 (2012). pp. 82-86.

Pasila, Felix and Alimin, Roche and Natalius, Hans (2015) Neuro-fuzzy architecture of the 3D model of massive parallel actuators. ARPN, Volume (12). pp. 2900-2905. ISSN 1819-6608

Prayogo, Doddy and Cheng, Min-Yuan and PRAYOGO, HANDY (2017) A Novel Implementation of Nature-inspired Optimization for Civil Engineering: A Comparative Study of Symbiotic Organisms Search. Civil Engineering Dimension, 19 (1). pp. 36-43. ISSN 1410-9530

Prayogo, Doddy and Tjong, Wong Foek and GUNAWAN, RICKY and ALI, STEFANO KUSUMA and SUGIANTO, STEVEN (2018) Optimasi Ukuran Penampang Rangka Batang Baja berdasarkan SNI 1729:2015 dengan Metode Metaheuristik Symbiotic Organisms Search. Jurnal Teknik Sipil ITB, 25 (1). pp. 41-52. ISSN 0853-2982

Prayogo, Doddy and KUSUMA, CHRISTIANTO TIRTA (2019) Optimization of Resource Leveling Problem under Multiple Objective Criteria Using a Symbiotic Organisms Search. Civil Engineering Dimension, 21 (1). pp. 43-49. ISSN 1410-9530

Prayogo, Doddy and SUTANTO, JESSICA CHANDRA and SURYO, HIERONIMUS ENRICO and ERIC, SAMUEL (2018) A Comparative Study on Bio-Inspired Algorithms in Layout Optimization of Construction Site Facilities. Civil Engineering Dimension, 20 (2). pp. 102-109. ISSN 1410-9530

Pudjisuryadi, Pamuda and Lumantarna, Benjamin (2018) Seismic Performance of Existing Building Retrofitted with VSL-Gensui Damper. Civil Engineering Dimension, 20 (2). pp. 86-90. ISSN 1979-570X

Pudjisuryadi, Pamuda and Lumantarna, Benjamin and Mulyadi, Elian Davin and Ferry, (2019) Performance of an Existing Reinforced Concrete Building Designed in Accordance to Older Indonesian Codes (PPTGIUG 1983 and SKSNI T-15-1991-03): Case Study for a Hotel in Balikpapan. Matec Web Conference, 258 (2019). pp. 1-6. ISSN 2261-236X

Pudjisuryadi, Pamuda and Lumantarna, Benjamin and SETIAWAN, RYAN and HANDOKO, CHRISTIAN (2018) Performance of an Existing Reinforced Concrete Building Designed in Accordance to Older Indonesian Seismic Code : A Case Study for a Hotel in Kupang, Indonesia. Civil Engineering Dimension, 20 (1). pp. 35-40. ISSN 1410-9530

Pudjisuryadi, Pamuda and Lumantarna, Benjamin and Tanday, Helen and Loka, Indryana Ductility of a 60-Story Shearwall Frame-Belt Truss (Virtual Outrigger) Building. Civil Engineering Dimension.

Pudjisuryadi, Pamuda and Lumantarna, Benjamin and Tandya, Helen and Loka, Indryana (2012) Ductility of a 60-Story Shearwall Frame-Belt Truss (Virtual Outrigger) Building. Civil Engineering Dimension, 14 (1). ISSN 1410-9530

Pudjisuryadi, Pamuda and Tavio, (2013) Compressive Strength Prediction of Square Concrete Columns Retrofitted with External Steel Collars. Civil Engineering Dimension.

Pudjisuryadi, Pamuda and Tavio, and Suprobo, Priyo (2015) Performance of square reinforced concrete columns externally confined by steel angle collars under combined axial and lateral load. Procedia Engineering, 125 (2015). pp. 1043-1049. ISSN 1877-7058

Pudjisuryadi, Pamuda and Tavio, Tavio Compressive Strength Prediction of Square Concrete Columns Retrofitted with External Steel Collars. Civil Engineering Dimension. ISSN 1410-9530

Pudjisuryadi, Pamuda and Tavio, Tavio and Suprobo, Priyo (2015) Performance of square reinforced concrete columns externally confined by steel angle collars under combined axial and lateral load. Procedia Engineering, 125 (2015). pp. 1043-1049. ISSN 1877-7058

Pudjisuryadi, Pamuda and Tavio, and Suprobo, Priyo (2013) Analytical Confining Model of Square Reinforced Concrete Columns using External Steel Collars. International Journal of ICT-aided Architecture and Civil Engineering, 1 (1). pp. 1-18. ISSN 2383-4773

Pudjisuryadi, Pamuda and Tavio, and Suprobo, Priyo (2016) Axial Compressive Behavior of Square Concrete Columns Externally Collared by Light Structural Steel Angle Sections. International Journal of Applied Engineering Research, 11 (7). pp. 4655-4666. ISSN 0973-4562

Purnomo, Joko and Chandra, Jimmy (2018) Evaluation of a Reinforced Concrete Wall Macroscopic Model for Coupled Nonlinear Shear-Flexure Interaction Response. Civil Engineering Dimension, 20 (1). pp. 41-50. ISSN 1979-570X

Purnomo, Joko and Tjong, Wong Foek (2018) Displacement and Stress Function-based Linear and Quadratic Triangular Elements for Saint-Venant Torsional Problems. Civil Engineering Dimension, 20 (2). pp. 70-77. ISSN 1410-9530

Rafiza, A. R. and Bakri, A. M. Mustafa Al and Kamarudin, H. and Nizar, I. Khairul and Hardjito, Djwantoro and Sandu, Ion and Hardjito, Djwantoro and Yahya, Zarina (2013) Study on Radioactivity Components, Water Quality and Microstructure Characteristic of Volcano Ash as Geopolymer Artificial Aggregate. Revista de Chimie, 64 (6). pp. 593-598.

Rafiza, A. R. and Bakri, A. M. Mustafa Al and Kamarudin, H. and Nizar, I. Khairul and Hardjito, Djwantoro and Zarina, Y. (2013) Evaluation of Pelletized Artificial Geopolymer Aggregate Manufactured From Volcano Ash. Australian Journal of Basic and Applied Sciences,, 7 (5). pp. 15-20. ISSN 1991-8178

Rafiza, A. R. and Bakri, A. M. Mustafa Al and Kamarudin, H. and Nizar, I. Khairul and Hardjito, Djwantoro and Zarina, Y. (2013) Reviews on the Properties of Aggregates made with or without Geopolymerisation Method. Advanced Materials Research, 626 (2013). pp. 892-895.

Rafiza, A. R. and Bakri, A. M. Mustafa Al and Kamarudin, H. and Nizar, I. Khairul and Hardjito, Djwantoro (2014) Microstructure study on volcano ash geopolymer aggregate at different sintering temperature. Key Engineering Material, 594 (2014). pp. 83-87. ISSN 10139826

Rafiza, A. R. and Bakri, A. M. Mustafa Al and Kamarudin, H. and Nizar, I. Khairul and Hardjito, Djwantoro (2015) Optimization of NaOH Molarity, LUSI Mud/Alkaline Activator, and Na2SiO3/NaOH Ratio to Produce Lightweight Aggregate-Based Geopolymer. International Journal of Molecular Sciences, 16 (5). pp. 11629-11647. ISSN 1422-0067

Rafiza, A. R. and Bakri, A. M. Mustafa Al and Kamarudin, H. and Nizar, I. Khairul and Hardjito, Djwantoro and Yahya, Zarina (2015) Mechanical Properties of Artificial Lightweight Geopolymer Aggregate (ALGA) Concrete using Volcano Mud with Various Sintering Temperature. Applied Mechanics and Materials, 754-75 (2015). pp. 279-283. ISSN 1662-7482

Rafiza, A. R. and Bakri, A. M. Mustafa Al and Kamarudin, H. and Nizar, I. Khairul and Hardjito, Djwantoro and Yahya, Zarina (2016) Performances of Artificial Lightweight Geopolymer Aggregate (ALGA) in OPC Concrete. Key Engineering Materials, 673 (2016). pp. 29-35. ISSN 1662-9795

Rafiza, A. R. and Bakri, A. M. Mustafa Al and Kamarudin, H. and Nizar, I. Khairul and Sandu, Ioan Gabriel and Hardjito, Djwantoro and Yahya, Zarina and Sandu, Andrei Victor (2014) Assessment on the Potential of Volcano Ash as Artificial Lightweight Aggregates using Geopolymerisation Method. Revista de Chemie, 65 (7). pp. 828-834. ISSN 1521-3773

SERAN, MARKUS DUPRI and Setiadji, Julius Sentosa (2024) Optimalisasi Pemakaian HDPE dan PP Sebagai Pengganti Sebagian Agregat Kasar Terhadap Kuat Tarik dan Kuat Tekan Beton. Jurnal Dimensi Insinyur Profesional, 2 (1). pp. 56-65. ISSN 3032-1565

SOEKRESNO, FERDIANA and Andi, and Rahardjo, Jani (2016) Evaluasi Penerapan 5S di Area Penyimpanan Alat pada Beberapa Proyek Konstruksi. Jurnal Media Teknik Sipil, 14 (2). pp. 147-157. ISSN 1693-3095

San, Gan Shu (2019) Analyzing Remanufacturability of Mobile Phones using DEMATEL Approach. Jurnal Teknik Industri, 21 (No. 1,). 33-42 . ISSN ISSN 1411-2485 print / ISSN 2087-7439 online

San, Gan Shu (2015) Closed-loop Supply Chain as an Agent of Sustainable Development. Jurnal Teknik Industri, 17 (1). pp. 7-16. ISSN 1411-2485

San, Gan Shu (2017) Knowledge Sharing in Closed-Loop Supply Chain Management. International Journal of Industrial Research and Applied Engineering, 2 (1). pp. 1-7. ISSN 2407-7259

San, Gan Shu and Pujawan, I Nyoman (2017) Pricing and Warranty Level Decisions for New and Remanufactured Short Life-Cycle Products. Jurnal Teknik Industri, vol. 1 (1). pp. 39-46. ISSN 1411-2485

San, Gan Shu and Pujawan, I Nyoman and Suparno, and Widodo, Basuki (2014) Pricing decision model for new and remanufactured short-life cycle products with time-dependent demand. Operations Research Perspectives, 2 (1). pp. 1-12. ISSN 2214-7160

Santoso, Hasan (2000) A Rational Buckling Model for Through Girders. Civil Engineering Dimension, Vol. 2 (No. 1). pp. 37-42. ISSN 1410-9530

Setiawan, Alexander Effect of Information Technology Maturity Model Process by using Domain Information Technology Acquisition and Implementation in Higher Education. Proceedings of International Seminar on Applied Technology, Science, and Arts (2nd APTECS).

Setiawan, Alexander INFLUENCE OF ELECTRONIC MEDIA AND EXTERNAL REWARD TOWARDS KNOWLEDGE SHARING MANAGEMENT TO LEARNING PROCESS IN HIGHER EDUCATION INSTITUTION. International Conference Soft Computing and Intelligent System.

Setiawan, Alexander and Intan, Rolly and Filiano, Rikko APLIKASI INPUT METHOD EDITOR (IME) JEPANG BERBASIS WEB. Jurnal Ilmah Teknologi Informasi.

Setiawan, Rudy (2011) Analisis Desain Geometri Persimpangan dan Akses Kampus Universitas Kristen Petra. Jurnal Transportasi , 12 (1). ISSN 1411-2442

Setiawan, Rudy and Santosa, Wimpy and Sjafruddin, Ade (2015) Effect of habit and car access on student behavior using cars for traveling to campus. Proceedia Engineering, 125 (1). 571–578. ISSN 1877-7058

Setiawan, Rudy and Santosa, Wimpy and Sjafruddin, Ade (2011) Integration of Theory of Planned Behavior and Norm Activation Model on Student Behavior Model Using Cars for Traveling to Campus. Civil Engineering Dimension, 16 (2). pp. 117-122. ISSN 1410-9530

Setiawan, Rudy and Santosa, Wimpy and Sjafruddin, Ade (2017) The Effect of Students’ Car Access and Car use Habits on Student Behavior to Reduce using Cars for Traveling to Campus. Procedia Engineering, Volume (-). 1454–1462. ISSN 1877-7058

Sugiharto, Handoko and Pudjisuryadi, Pamuda and Wardaya, D.A.S (2017) Compressive Strength of Post Fire Exposed Concrete Column Wrapped with Fiber Reinforced Polymer. Civil Engineering Dimension, 19 (2). pp. 105-110. ISSN 1410-9530 / 1979-570X

Sugiharto, Handoko and Santoso, Hasan (2001) REDISTRIBUSI MOMEN PADA BALOK KOMPOSIT MENERUS DENGAN MEMPERHATIKAN PENGARUH MOMEN INERSIA NEGATIF. Dimensi Teknik Sipil, Vol. 3 (No. 2). pp. 80-83. ISSN 1410-9530

Sugiharto, Handoko and Tjong, Wong Foek (2004) Rancang Bangun Alat Uji Permeabilitas Beton. Dimensi Teknik Sipil, 6 (2). pp. 94-100. ISSN 1410-9530

Tanojo, Effendy and Pudjisuryadi, Pamuda and CANDRA, BILLY PRAWIRA and WILLIAM, WELLY (2015) Design capacity tables for structural steel based on SNI 03-1729-2002: built-up sections. Procedia Engineering, 125 (2015). pp. 1142-1148. ISSN 1877-7058

Tavio, and Pudjisuryadi, Pamuda and Suprobo, Priyo (2015) Strength and ductility of external steel collared concrete columns under compressive loading. Journal of Asian Concrete Federation, 1 (1). pp. 47-56. ISSN 2465-7964

Teng, Susanto and Chandra, Jimmy (2016) Cyclic Shear Behavior of High Strength Concrete Structural Walls. ACI Structural Journal, 113 (6). pp. 1335-1345. ISSN 0889-3241

Tjandra, Daniel (2010) VARIASI SISTEM PERKUATAN PONDASI BANGUNAN LAMA (PONDASI FOOTING DAN PONDASI TIANG). Dinamika Teknik Sipil, 10 (2). pp. 138-143. ISSN 1411-8904

Tjandra, Daniel and Indarto, and Soemitro, Ria A. A. (2015) Behavior of Expansive Soil under Water Content Variation and Its Impact to Adhesion Factor on Friction Capacity of Pile Foundation. International Journal of Applied Engineering Research, 10 (18). pp. 38913-38917. ISSN 0973-4562

Tjandra, Daniel and Indarto, and Soemitro, Ria A. A. (2015) EFFECT OF DRYING-WETTING PROCESS ON FRICTION CAPACITY AND ADHESION FACTOR OF PILE FOUNDATION IN CLAYEY SOIL. Jurnal Teknologi, 77 (11). pp. 145-150. ISSN 2180#655333722

Tjandra, Daniel and Indarto, and Soemitro, Ria Asih Aryani (2013) THE EFFECTS OF WATER CONTENT VARIATION ON ADHESION FACTOR OF PILE FOUNDATION IN EXPANSIVE SOIL. Civil Engineering Dimension, 15 (2). pp. 114-119. ISSN 1410-9530

Tjandra, Daniel and Indarto, and Soemitro, Ria Asih Aryani (2013) THE EFFECTS OF WATER CONTENT VARIATION ON ADHESION FACTOR OF PILE FOUNDATION IN EXPANSIVE SOIL. Civil Engineering Dimension, 15 (2). pp. 114-119. ISSN 1410-9530

Tjandra, Daniel and Indarto, and Soemitro, Ria Asih Aryani (2013) The Influence of Water Content Variations on Friction Capacity of Piles in Expansive Soil. International Journal of ICT-aided Architecture and Civil Engineering, 1 (1). pp. 31-39. ISSN 2383-4773 IJIACE

Tjandra , Daniel and Indarto, Indarto and Soemitro, Ria Asih Aryani (2014) The Influence of Water Content Variations on Friction Capacity of Piles in Expansive Soil. International Journal of ICT-aided Architecture and Civil Engineering, 1 (1). pp. 31-39. ISSN 2383-4773 IJIACE

Tjong, Wong Foek and Andriono, Takim and Sumendap, Robby and Gunawan, Freddy (2003) Studi Efektifitas Penggunaan Tuned Mass Damper pada Struktur Gedung dalam Mereduksi Respons Dinamik akibat Beban Seismik. Dimensi Teknik Sipil, 5 (2). pp. 61-62. ISSN 1410-9530

Tjong, Wong Foek and ERWIN, and RICHARD, ALEXANDER and Katili, Irwan (2017) Development of the DKMQ Element for Buckling Analysis of Shear-deformable plate bending. Procedia Engineering, 171 (2017). pp. 805-812. ISSN 1877-7058

Tjong, Wong Foek and Pudjisuryadi, Pamuda and Kanok-Nukulchai, Worsak and Christabel, Yosua (2015) Testing of Kriging-based Finite Element Method to Shell Structures with Varying Thickness. Procedia Engineering, 125 (1). pp. 843-849. ISSN 1877-7058

Tjong, Wong Foek and Sugianto, Steven (2017) Study of the Discrete Shear Gap Technique in Timoshenko Beam Elements. Civil Engineering Dimension, 19 (1). pp. 54-62. ISSN 1410-9530 print/ 1979-570X online

Tjong, Wong Foek and WIDJAJA, KRISTOFER (2018) Development of the DKMQ Element for Analysis of Composite Laminated Folded Plate Structures. Civil Engineering Dimension, 20 (1). pp. 8-15. ISSN 1410-9530

Tjong, Wong Foek and GUNAWAN, JUNIUS and AGUSTA, KEVIN and HERRYANTO, and TANAYA, LEVIN SERGIO (2019) On the Derivation of Exact Solutions of a Tapered Cantilever Timoshenko Beam. Civil Engineering Dimension, 21 (2). pp. 89-96. ISSN 1401-9530 print/ 1979-570X online

Tjong, Wong Foek and Kanok-Nukulchai, Worsak (2008) Kriging-based Finite Element Method: Element-by-element Kriging Interpolation. Civil Engineering Dimension, 11 (1). pp. 15-22. ISSN 1410-9530

Tjong, Wong Foek and Kanok-Nukulchai, Worsak (2008) On the Convergence of the Kriging-based Finite Element Method. International Journal of Computational Methods, 6 (1). pp. 93-118. ISSN 0219-8762

Tjong, Wong Foek and Syamsoeyadi, Hidayat (2010) Kriging-based Timoshenko Beam Element for Static and Free Vibration Analyses. Civil Engineering Dimension, 13 (1). pp. 42-49. ISSN 1410-9530

Tran, Duc-Hoc and Cheng, Min-Yuan and Prayogo, Doddy (2016) A novel Multiple Objective Symbiotic Organisms Search (MOSOS) for time–cost–labor utilization tradeoff problem. Knowledge-Based Systems, 94. pp. 132-145. ISSN 09507051

WIDODO, TEGUH HERMAWAN and CHANDRA, LUCKY and Antoni, and Hardjito, Djwantoro (2014) Rheology of High Volume Sidoarjo Mud Mortar. Materials Science Forum, 803 (2015). pp. 160-165. ISSN 1662-9752

WIYONO, DAVID and Antoni, and Hardjito, Djwantoro (2015) Improving the durability of pozzolan concrete using alkaline solution and geopolymer coating. Procedia Engineering, 125 (125). pp. 747-753. ISSN 1877-7058

Wijaya, Gunawan Budi and LAYS, DAVID PRATAMA and TANTO, HONGKY HAODIWIDJAJA and Tjandra, Daniel (2019) Study on Graphite Powder as Conductive Pigments for Impressed Current Cathodic Protection System using Carbon Fiber Reinforced Polymer Anode. Civil Engineering Dimension, 21 (2). pp. 84-88. ISSN 1410-9530

Wulandari, Paravita Sri and Tjandra, Daniel (2019) Analisis Pengaruh Fluktuasi Muka Air Waduk terhadap Stabilitas Lereng Waduk Dengan Menggunakan Program Plaxis 2D. Media Komunikasi Teknik Sipil, 24 (2). pp. 113-121. ISSN 2549-6778

Wulandari, Paravita Sri and Tjandra, Daniel (2015) Analysis of Piled Raft Foundation on Soft Soil Using PLAXIS 2D. Procedia Engineering, 125 (-). 363–367. ISSN -

Wulandari, Paravita Sri and Tjandra, Daniel (2015) Analysis of geotextile reinforced road embankment using PLAXIS 2D. Procedia engineering, 125 (-). pp. 358-362. ISSN -

Wulandari, Paravita Sri and Tjandra, Daniel (2017) Use of Crumb Rubber as an Additive in Asphalt Concrete Mixture. Procedia Engineering, 171 (-). pp. 1384-1389. ISSN -

Wulandari, Paravita Sri and Tjandra, Daniel (2018) Pengaruh Persentase Butiran Halus Terhadap Perubahan Kuat Kokoh Tanah Lempung Akibat Fluktuasi Muka Air Tanah. Rekayasa Jurnal Teknik Sipil, 3 (1). pp. 1-6. ISSN 2527 #65533 5542

pratikto, and Octavia, Tanti (2009) Keseimbangan Lintasan Tipe U-line Assembly pada Perakitan Pompa Air. teknik industri, 11 (1). pp. 43-50. ISSN 1411-2485

Book

Antoni, Antoni and Hardjito, Djwantoro and wijaya, kevin and Hartono, florentcia and tanuwijaya, steven (2022) INVESTIGASI POTENSI FLY ASH DARI PLTU BARU ATAU BELUM DIKENAL SEBAGAI MATERIAL PENGIKAT PADA BETON. UNIVERSITAS KRISTEN PETRA. ISBN 978-602-5446-97-9

Antoni, and Ginsar, Ima Muljati and Hardjito, Djwantoro (2015) Civil Engineering Innovation for a Sustainable Future. Procedia Engineering . Elsevier. ISBN 1877-7058

Antoni, and Hardjito, Djwantoro (2012) PEMANFAATAN LUMPUR SIDOARJO SETELAH PEMANASAN SEBAGAI BAHAN POZOLAN DALAM PEMBUATAN BETON. LPPM UK Petra.

Antoni, and Hardjito, Djwantoro and Tanojo, Effendy (2014) PENINGKATAN DURABILITAS PERMUKAAN BETON DENGAN LARUTAN ALKALI (II). LPPM. ISBN NA

Budi, Gogot (2011) Pondasi Dangkal. Penerbit Andi, Penerbit Andi. ISBN 978-979-29-2579-1

Budi, Gogot Setyo (2011) Pondasi Dangkal. Andi . ISBN 978-979-29-2579-1

Chandra, Jimmy and Warnitchai, Pennung (2011) Seismic Retrofitting of RC Buildings using Buckling Restrained Braces Case Study: A Mid Rise Gravity Load Designed Reinforced Concrete Frame Building with A Soft/Weak First Story. Lambert Academic Publishing. ISBN 978-3-8383-8720-8

Ekaputri, Januarti Jaya and Antoni, (2016) Properties and Application of Geopolymers. Material Science Forum . Trans Tech Publication. ISBN 978-3-03835-544-1

Ginsar, Ima Muljati and Lumantarna, Benjamin and Sibarani, Barnabas H.H.B. and Kodrat, Bobby Liantono (2011) Perencanaan Pseudo Elastis: Evaluasi Kolom Elasts pada Bangunan Tidak Beraturan 6- dan 10-Lantai dengan Vertical Set-Back 50 di Wilayah 2 Peta Gempa Indonesia. Prodi Teknik Sipil UK Petra.

Ginsar, Ima Muljati and Lumantarna, Benjamin and Goenawan, Adveni Novaline and Wijaya, Monita Lanny (2010) Evaluasi Kinerja Bangunan Tidak Beraturan 6- dan 10-Lantai dengan Vertical Set-Back 50 di Wilayah 2 Peta Gempa Indonesia yang Direncanakan secara Pseudo Elastis dan Kapasitas Sesuai SNI 03-2847-2002. Prodi Teknik Sipil UK Petra.

Ginsar, Ima Muljati and Lumantarna, Benjamin and Lauwis, Teguh and Sujanto, Indra (2010) Evaluasi Kinerja Bangunan Tidak Beraturan 6- dan 10-Lantai dengan Vertical Set-Back 50 di Wilayah 6 Peta Gempa Indonesia yang Direncanakan secara Pseudo Elastis dan Kapasitas Sesuai SNI 03-2847-2002. Prodi Teknik Sipil UK Petra.

Ginsar, Ima Muljati and Lumantarna, Benjamin and Santoso, Andrew Christian Herwanto and Sutanto , Andy Sutanto (2011) Perencanaan Pseudo Elastis: Evaluasi Kolom Elasts pada Bangunan Tidak Beraturan 6- dan 10-Lantai dengan Vertical Set-Back 50 di Wilayah 6 Peta Gempa Indonesia. Prodi Teknik Sipil UK Petra.

Ginsar, Ima Muljati and Lumantarna, Benjamin and Suwadji, Felix and Limanto, Lisayuri and Sutanto, Fandy Indra and Martinus, Albert (2010) Studi Awal ASCE 7-10 Sebagai Standar Perencanaan Ketahanan Gempa di Indonesia. Prodi Teknik Sipil UK Petra.

Ginsar, Ima Muljati and Lumantarna, Benjamin and Suwadji, Felix and Sutanto, Fandy Indra and Martinus, Albert (2010) Contoh Aplikasi ASCE 7-10 Sebagai Standar Perencanaan Ketahanan Gempa di Indonesia. Prodi Teknik Sipil UK Petra.

Ginsar, Ima Muljati and Santoso, Hasan and Limongan, John and Leonanta, Yudi Setyadi (2010) Evaluasi Kinerja Struktur Baja dengan Sistem Rangka Pemikul Momen Khusus (SRPMK) yang Menggunakan Reduced Beam Section di Wilayah 2 Peta Gempa Indonesia. Prodi Teknik Sipil UK Petra.

Ginsar, Ima Muljati and Santoso, Hasan and Luis, Christian and Hadinyoto, Try Wibowo (2010) Evaluasi Kinerja Struktur Baja dengan Sistem Rangka Pemikul Momen Khusus (SRPMK) yang Menggunakan Reduced Beam Section di Wilayah 6 Peta Gempa Indonesia. Prodi Teknik Sipil UK Petra.

Ginsar, Ima Muljati and Santoso, Hasan and Suwadji, Felix and Sutanto, Fandy Indra and Martinus, Albert (2010) Kinerja Struktur Baja dengan Sistem Rangka Pemikul Momen Khusus yang Menggunakan Reduced Beam Section dalam Dua Arah Orthogonal. Prodi Teknik Sipil UK Petra.

Ginsar, Ima Muljati and Tanojo, Effendy and Singgih, Erwin and Luntungan, Normans (2012) Perbandingan RSNI Baja Canai Dingin dengan Standar Amerika AISI S100-07. Prodi Teknik Sipil UK Petra.

Hardjito, Djwantoro (2011) Contribution in Research and Community Service: Celebrating Petra Christian University Golden Jubilee. Petra Press, Surabaya. ISBN 978-979-19740-4-2

Hardjito, Djwantoro and Antoni, Antoni and Muljati, Ima (2012) Developments in Structural Engineering and Construction Technology. Petra Press, Surabaya. ISBN 978-979-99765-1-2

Hardjito, Djwantoro and Antoni, (2013) Innovations in Civil Engineering for Society and the Environment. Petra Press. ISBN 9789799976536

Hardjito, Djwantoro and Antoni, and Anggono, Juliana (2012) Kajian Eksperimental Pemanfaatan Lumpur Sidoarjo untuk Pembuatan Beton Geopolimer Ramah Lingkungan. LPPM UK Petra.

Hardjito, Djwantoro and Antoni, and Ginsar, Ima Muljati (2012) Development in Structural Engineering and Construction Technology. LPPM UK Petra. ISBN 978-979-99765-1-2

Hardjito, Djwantoro and Antoni, and Sugiharto, Handoko (2014) PENGOLAHAN DAN PEMANFAATAN LUMPUR SIDOARJO SEBAGAI MATERIAL PENGIKAT UNTUK PEMBUATAN BATA RINGAN RAMAH LINGKUNGAN. UK Petra. ISBN Nil

Mulyono, Grace and Thamrin, Diana and Antoni, (2022) Furnitur Beton: Pengembangan Furnitur Beton untuk Ruang Tunggu Publik setelah masa Pandemi. Furnitur Beton . Petra Press. ISBN 978-623-5457-07-9

Setyo Budi, Gogot (2011) Pengujian Tanah di Laboratorium, Penjelasan dan Panduan. Graha Ilmu, Surabaya. ISBN 978-979-756-752-1

Tjong, Wong Foek (2021) Pengantar Metode Elemen HIngga untuk Analisis Struktur- Teori, Perumusan, Implementasi Komputer, dan Aplikasi. Rajawali Pers, PT RajaGrafindo Persada. ISBN 978-623-231-958-5

Conference or Workshop Item

UNSPECIFIED MODEL KEPERCAYAAN DAN KEPUASAN KERJA TERHADAP KESUKSESAN PROYEK. In: Makalah KoNTekS7 UNS 2013, 2013, Universitas Negeri Solo.

UNSPECIFIED MODEL KEPERCAYAAN DAN KEPUASAN KERJA TERHADAP KESUKSESAN PROYEK. In: Makalah KoNTekS7 UNS 2013, Universitas Negeri Solo.

Agustin, Karina and Soewandi, Hanijanto (2022) Capturing Social Value using Ordinal Data, Gower Distance & Quality Point. In: 24th ASEAN Valuers Association (AVA) Congress, 24-11-2022 - 24-11-2022, Bali - Indonesia.

Agustin, Karina and Soewandi, Hanijanto (2021) Does it Pay to be Perfect? A Lesson Learnt from CV XYZ. In: 2nd Asia Pacific Conference on Industrial Engineering and Operations Management, 16-09-2021 - 16-09-2021, Surakarta - Indonesia.

Antoni, and Hardjito, Djwantoro and WIBOWO, FELIX and Chandra, N.W. (2012) Influence of Heat Treatment Temperature, Particle Fineness and Replacement Ratio of Sidoarjo Mud as Pozzolanic Materia. In: The 5th International Conference of Asian Concrete Federation, 24-10-2012 - 26-10-2012, Pattaya, Thailand - Thailand.

Antoni, Antoni and Hardjito, Djwantoro (2011) THE INFLUENCE OF COMPACTION METHODS ON THE PROPERTIES OF HOLLOW CONCRETE BRICKS UTILIZING FLY ASH AND BOTTOM ASH. In: The 3rd International Conference of European Asian Civil Engineering Forum, 20-22 September 2011, Yogyakarta, Indonesia.

Antoni, and ADI, NATHANAEL and KURNIAWAN, MARCELLINUS EVAN and AGRAPUTRA, AUDI and TEOPILUS, DANIEL and Pudjisuryadi, Pamuda and Chandra, Jimmy and Hardjito, Djwantoro (2022) The influence of viscosity-modifying agent and calcium carbonate on 3D printing mortar characteristics. In: The 8th International Conference of Euro Asia Civil Engineering Forum 2022, 12-10-2022 - 12-10-2022, Rapperswil, Yogyakarta - Switzerland, Indonesia.

Antoni, and HERIANTO, JASON GHORMAN and ANASTASIA, EVELIN and Hardjito, Djwantoro (2017) Effect of Adding Acid Solution on Setting Time and Compressive Strength of High Calcium Fly Ash Based Geopolymer. In: Green Construction and Engineering Education Conference (GCEE) , 09-08-2017 - 09-08-2017, Malang - Indonesia.

Antoni, and Hardjito, Djwantoro and CHANDRA, LUCKY and WIDODO, TEGUH HERMAWAN (2013) On The Development of High Volume Volcanic Mud and Concrete. In: The Thirteenth East Asia Pacific Conference on Structural Engineering and Construction (EASEC13), 11-09-2013 - 13-09-2013, Sapporo - Japan.

Antoni, and JOS, RONALD and LUKITO, MARTIN MARCELLINUS (2011) Influence of Water Absorption on Properties of AAC and CLC Lightweight Concrete Brick. In: th 4th ASEAN Civil Engineering Conference , 22-11-2011 - 23-11-2011, Yogyakarta - Indonesia.

Antoni, and KLARENS, KEVIN and INDRANATA, MICHAEL and Jamali, Lutfi Al and Hardjito, Djwantoro (2017) The use of bottom ash for replacing fine aggregate in concrete paving blocks. In: Euro Asia Civil Engineering Forum (EACEF) 2017, 25-08-2017 - 25-08-2017, Seoul - Korea Selatan.

Antoni, and MANUEL, EDO and SUNARKO, JULIUS and Hardjito, Djwantoro (2011) The Influence of Compaction Methods on the Properties of Hollow Concrete Bricks Utilizing Fly Ash and Bottom Ash. In: The 3rd International Conference of European Asian Civil Engineering Forum (EACEF 20111), 20-09-2011 - , Yogyakarta - Indonesia.

Antoni, and SATRYA, VINDY and Hardjito, Djwantoro (2014) MECHANICAL ACTIVATION OF FLY ASH FOR MAKING HIGH VOLUME FLY ASH CONCRETE. In: The 6th International Conference of Asian Concrete Federation, 21-09-2014 - 24-09-2014, Seoul - Korea.

Antoni, and SULISTIO, ALDI VINCENT and WAHJUDI, SAMUEL and Hardjito, Djwantoro (2017) Processed bottom ash for replacing fine aggregate in making high-volume fly ash concrete. In: Euro Asia Civil Engineering Forum (EACEF) 2017, 25-08-2017 - 25-08-2017, Seoul - Korea Selatan.

Antoni, and WIDIANTO, ALVIN KRISNANTA and WIRANEGARA, JERRY LAKSMANA and Hardjito, Djwantoro (2016) Consistency of Fly Ash Quality in Making High Volume Fly Ash Concrete. In: SRIWIJAYA INTERNATIONAL CONFERENCE ON ENGINEERING, SCIENCE & TECHNOLOGY (SICEST2016), 10-11-2016 - 10-11-2016, Bangka Island - Indonesia.

Aysia, Debora Anne Yang and Palit, Herri Christian (2014) Pengaruh Preferensi Musik terhadap Performa Kerja Mental. In: Seminar Nasional Manajemen Teknologi XXI, 19-07-2014 - 19-07-2014, Surabaya - Indonesia.

Aysia, Debora Anne Yang and Wiharjo, Halim (2013) Penurunan Kerusakan Iron Chip pada Produk Speaker dengan Model DMAIC. In: Seminar Nasional Terpadu Keilmuan Teknik Industri 2013, 16-03-2013 - 16-03-2013, Malang - Indonesia.

BUDIMAN, FENNI SURYANITA and Panjaitan, Togar Wiliater Soaloon (2023) Perancangan Sistem Manajemen Keselamatan dan Kesehatan Kerja di PT X. In: SEminar Nasional Teknik Industri, - 08-11-2014, - .

Budi, Gogot (2009) Pengelolaan penerbitan Jurnal yang Memenuhi Standar Mutu dan Tata Kelola Nasional. In: Pengelolaan Naskah Jurnal yang Memenuhi Standar Mutu dan Tata Kelola Nasional, 28 Agustus 2009, UK Petra.

Budi, Gogot (2009) Perbaikan Pengelolaan dan Sistem Informasi Jurnal. In: Workshop Perbaikan Pengelolaan dan Sistem Informasi Jurnal, 24 Oktober 2009, Politeknik Semarang.

Budi, Gogot Setyo and CHARLES, and WIJAYA, HENDRY CHRISTIANTO (2015) Deviation of Position of Piles Foundation from Its Original Designed Location. In: Proceedings 10th Indonesian Geotechnical Engineering Conference and 19th Annual Scientific Meetiing , 24-11-2015 - 24-11-2015, Jakarta - Indoensia.

CLARISSA, JESSELYN and Halim, Siana and Yahya, Bernardo Nugroho and Agustin, Karina and Sahputra, Iwan Halim (2021) A Policy Strategy Evaluation for Covid-19 Pandemic in the City of Surabaya Using Vensim Ventana Dynamic System Simulation. In: 2021 3rd East Indonesia Conference on Computer and Information Technology (EICONCIT), 10-04-2021 - 10-04-2021, Surabaya - Indonesia.

Chandra, Herry Pintardi and Wiguna , I Putu Artama Pengelolaan Pemangku Kepentingan Dalam Upaya Peningkatan Inovasi Kinerja Proyek. In: APMMI 1 MMT ITS.

Chandra, Herry Pintardi and Kusumastuti, Cilcia (2018) Aplikasi Konsep Konservasi Air pada Hotel Bintang Tiga di Surabaya. In: Konferensi Nasional Teknik Sipil 12, 19-09-2018 - 19-09-2018, Batam - Indonesia.

Chandra, Herry Pintardi and Nugraha, Paulus (2013) Perceptions of Contractors and Consultants Toward Application of Greenship Rating Tools on Apartment Buildings in Surabaya. In: International Seminar on Applied Technology, Science, and Art (4th APTECS 2013), 10 Desember 2013, ITS Surabaya.

Chandra, Herry Pintardi and Wiguna, I Putu Artama INDEKS PENGARUH PEMANGKU KEPENTINGAN DALAM KEBERHASILAN PROYEK APARTEMEN DI SURABAYA. In: SEMNAS Sipil ITS IX - 2013, 6 Februari 2013, ITS.

Chandra, Jimmy (2010) Seismic Performance Evaluation and Retrofit Approaches of Irregular Gravity Load Designed Reinforced Concrete Frame Buildings. In: Seminar dan Pameran HAKI 2010, Jakarta.

Chandra, Jimmy (2010) Verification of A Reinforced Concrete Column Computer Model Under Uniaxial and Biaxial Bending Loading Conditions. In: Konferensi Nasional Teknik Sipil 4, Bali.

Chandra, Jimmy and Anwar, Naveed and Rayamajhi, Deepak (2009) Different Techniques for the Modeling of Concrete I-Girder Bridges. In: IABSE Symposium 2009, Bangkok.

Chandra, Jimmy and Liu, Yu and Teng, Susanto (2011) Analytical Study on High Strength Concrete Shear Walls. In: 36th Conference on Our World in Concrete & Structures, 16-08-2011 - 16-08-2011, Singapura - Singapura.

Chandra, Jimmy and Pudjisuryadi, Pamuda and Antoni, and Wibowo, Hartanto (2020) Analytical modeling of 3D-printed reinforced concrete beams. In: 4th International Conference on Civil Engineering Research (ICCER 2020), 23-07-2020 - 23-07-2020, Surabaya - Indonesia.

Chandra, Jimmy and Teng, Susanto (2012) Shear Strength of Normal to High Strength Concrete Walls. In: 1st International Conference on Sustainable Civil Engineering Structures and Construction Materials, 13-09-2012 - 13-09-2012, Yogyakarta - Indonesia.

Chandra, Jimmy and Warnitchai, Pennung and Rayamajhi, Deepak and Anwar, Naveed (2010) Performance Based Seismic Evaluation and Retrofitting of Unsymmetrical Medium Rise Buildings - A Case Study. In: ASEP Convention on Concrete Engineering Practice and Technology 2010, Manila.

Chandra, Jimmy and Pudjisuryadi, Pamuda and Antoni, (2021) Modeling and analysis of 3D-printed reinforced and prestressed concrete beams. In: Digital and Empathic Engagement in the New Era for Architecture and Civil Engineering 2021, 21-08-2021 - 21-08-2021, Surabaya - Indonesia.

Felecia, and Halim, Siana and Wulandari, Dian (2017) Library Facility Layout Design for Digital Native Generation. In: IEEE-IEEM 2017, 13-12-2017 - 13-12-2017, Singapore - Singapore.

Felecia, and Halim, Siana and Tulistyantoro, Lintu and Wulandari, Dian (2018) Library Interior Design for Digital Native Generation. In: International Conference on Logistic and Business Innovation, 28-09-2018 - 28-09-2018, Kuta, Bali - Indonesia.

GUNAWAN, JESSICA PRISCILLIA and Palit, Herri Christian and Aysia, Debora Anne Yang (2021) Tingkat Kualitas Tidur Pelajar Selama Pembelajaran Daring. In: Seminar Nasional Teknik dan Manajemen Industri (SENTEKMI 2021), 11-11-2021 - 11-11-2021, Bandung - Indonesia.

Ginsar, Ima Muljati and Santoso, Hasan (2011) Partial Capacity Design, An Alternative to the Capacity Design Method. In: The 3rd International Conference of European Asian Civil Engineering Forum, 20-09-2011 - 22-09-2011, Yogyakarta - Indonesia.

Ginsar, Ima Muljati and Lumantarna, Benjamin (2011) Seismic Performance of Steel Special Moment Resisting Frame Using Reduced Beam Section. In: The 3rd International Conference of European Asian Civil Engineering Forum, 20-09-2011 - 22-09-2011, Yogyakarta - Indonesia.

Ginsar, Ima Muljati and Lumantarna, Benjamin (2011) Seismic Performance of Structures with Vertical Geometric Irregularity Designed Using Partial Capacity Design. In: The 2nd International Conference on Earthquake Engineering and Disaster Mitigation (ICEEDM-II 2011), 19-07-2011 - 20-07-2011, Surabaya - Indonesia.

Hardjito, Djwantoro and Antoni, Antoni and Chandra, A.A. and Pratomo, A. (2011) Properties of Environmentally-friendly Concrete Bricks under Different Curing Regimes. In: The 4th ASEAN Civil Engineering Conference, 22-23 November 2011, Yogyakarta, Indonesia.

Hardjito, Djwantoro and Siaw Wee, Valerie Jong and Fu Ee, Tang (2011) The Use of Fly Ash and Bottom Ash in Geopolymer Mortar. In: Seminar Nasional Zeolite VII, 17-10-2011 - , Surabaya - Indonesia.

Hardjito, Djwantoro and Wee, Valerie Jong Siaw and Ee, Tang Fu (2011) THE USE OF FLY ASH AND BOTTOM ASH IN GEOPOLYMER MORTAR. In: Seminar Nasional Zeolit VII, 17-18 October 2011, Hotel Majapahit, Surabaya, Indonesia.

Hardjito, Djwantoro and Why, Sin Wing (2011) On the Use of Quarry Dust and Bottom Ash as Controlled Low Strength Materials (CLSM). In: Concrete2011 Building a Sustainable Future, 12-14 October 2011, Perth, Australia.

Hardjito, Djwantoro and Antoni, and BUNANTA, ISAAC VALENTINO and WICAKSONO, KURNIADI (2013) GEOPOLYMERISATION OF VOLCANIC MUD. In: The 4th International Conference of Euro Asia Civil Engineering Forum, 25-06-2013 - 26-06-2013, Singapore - Singapore.

Hardjito, Djwantoro and Antoni, and CHANDRA, ANDY HARTANTO and PRATOMO, ANDREW (2011) Properties of Environmentally-friendly Concrete Bricks under Different Curing Regimes. In: The Joint 4th AUN/SEED-Net Regional Conference on Civil Engineering (ACEC) and Env. Engineering, 22-11-2011 - , Yogyakarta - Indonesia.

Hardjito, Djwantoro and Antoni, and SURYAWANGI, ERWIN and TAKARENDEHANG, YOHANES (2013) Development of Volcanic Mud-Based Geopolymer Aggregate. In: The Sixth Civil Engineering Conference in Asia Region (CECAR6), 20-08-2013 - 22-08-2013, Jakarta - Indonesia.

Hardjito, Djwantoro and Why, Sin Wing (2011) On the Use of Quarry Dust and Bottom Ash as Controlled Low Strength Materials (CLSM). In: Concrete 2011, Building a Sustainable Future, 12-10-2011 - , Perth - Australia.

Hermawan, Surya and HANS, OCTAVIUS and GUNAWAN, CHRISTIAN and Tjandra, Daniel and Purnomo, Joko (2019) The utilisation of the numerical hydrodynamic model to face rob floods in coastal areas in the industrial revolution era 4.0 at east java Indonesia. In: 2nd International Conference on Sustainable Infrastructure, 29-10-2019 - 29-10-2019, Yogyakarta - Indonesia.

Hermawan, Surya and HINDROMARTONO, VIKTOR ATANTO and HANENKANG, AXEL DOUGLAS and Harjanti, Dhyah and Marchyta, Nony Kezia (2023) Persepsi Masyarakat Daerah Pesisir Sidoarjo Terhadap Pemakaian ALPAMAL (Alat Pemurnian Air Payau dengan Material Lokal) di Masa Krisis Air. In: Seminar Nasinal Ma Chung 2023, 21-12-2023 - 21-12-2023, Malang - Indonesia.

Hermawan, Surya and Purnomo, Joko and Tjandra, Daniel and Pontjoharyo, Welly and Dalrino, (2019) THE UTILIZATION OF THE DRONE AND SONAR FOR FLOOD DESIGN IN CONSTRUCTION ERA 4.0. In: HATHI 6th International Seminar on Advancement of Water Resources Management in a Global Challenge K, 24-11-2019 - 24-11-2019, Kupang - Indonesia.

Hermawan, Surya (2017) High Spatial Grid Resolution of Hydrodynamic Numerical Modeling for Sea Current Energy Site Selection in Indonesia. In: 3rd International Conference on Electrical Systems, Technology and Information (ICESTI 2017), 29-09-2017 - 29-09-2017, Bali - Indonesia.

Hermawan, Surya (2023) Kontribusi Mahasiswa Teknik Sipil dalam Mengatasi Krisis Air Bersih pada Masa El Nino di Daerah Pesisir Kabupaten Sidoarjo, Jawa Timur. In: Seminar Nasinal Ma Chung 2023, 21-12-2023 - 21-12-2023, Malang - Indonesia.

Hermawan, Surya and ARIESTO, FRANKLYN and CHANDRA, MICHAEL (2021) Dedikasi Mahasiswa Teknik Sipil Pada Masa Era Pandemi Covid-19 di Sekolah Dasar Margorukun I Bubutan Surabaya. In: Seminar Nasional Pengabdian Kepada Masyarakat-3, 28-10-2021 - 28-10-2021, Surabaya - Indonesia.

Hermawan, Surya and ASTANTO, KIAN and RUHULESSIN, HEIDDY IMANUELA and LATUIHAMALLO, LOUIS LUIGI (2021) PENINGKATAN KREATIVITAS BAGI ANAK USIA DINI DAN PELATIHAN EKONOMI DASAR BAGI WARGA TEGALSARI, KECAMATAN JABON, SIDOARJO. In: Seminar Nasional Pengabdian Kepada Masyarakat-3, 28-10-2021 - 28-10-2021, Surabaya - Indonesia.

Hermawan, Surya and HARSONO, KEVIN and BONG, NIGEL (2020) Sustainable design for passage boat ports in remote areas in era construction 4.0 at sidoarjo east java indonesia. In: 2nd International Conference on Sustainable Infrastructure, 29-04-2020 - 29-04-2020, Yogyakarta - Indonesia.

Hermawan, Surya and HARSONO, KEVIN and BONG, NIGEL and Gho, Danny Wahyudi (2020) The Utilization of Hydrodinamics Models in Validating the East Java Rip Current in the Era of Industrial Revolution 4.0. In: The 5th Engineering Science and Technology International Conference, 09-09-2020 - 09-09-2020, Padang - Indonesia.

Hermawan, Surya and HUSADA, VANESSA NATHANIA and PUTRI, AGNES YULIANA and WIJAYA, CHRISTICIA JEAN PUTRI (2021) PEMBARUAN FASILITAS PANTI ASUHAN ELPIDOS MOJOARUM SURABAYA. In: Seminar Nasional Pengabdian Kepada Masyarakat-3, 28-10-2021 - 28-10-2021, Surabaya - Indonesia.

Hermawan, Surya and Leman, Susanto (2020) Implementation Photography as a Media and Supports in Construction Era 4.0 at the Civil Engineering for the Construction Design to Face Tidal Floods due to Global Warming. In: 2nd International Conference on Sustainable Infrastructure , 29-04-2020 - 29-04-2020, Yogyakarta - Indonesia.

Hermawan, Surya and Purnomo, Joko and Tjandra, Daniel (2018) The Benefit of Wind Distribution Analysis for Coastal Construction Design in East Java Province. In: ESTIC 2018, 29-08-2018 - 29-08-2018, Padang - Indonesia.

Hermawan, Surya and SUHENDRO, SAMUEL VITO and LIMWANTO, JAXON and RIADY, ELBERT GRAND and DEMORA, CALVIN and PATRICK, NICHOLAS (2022) MENJALIN KERJASAMA DENGAN PEMUDA KARANGTARUNA UNTUK MENINGKATKAN KUALITAS LINGKUNGAN. In: Seminar Nasional Pengabdian Kepada Masyarakat 4, 24-11-2022 - 24-11-2022, Surabaya - Indonesia.

Hermawan, Surya and Tjahyana, Angela Jasmine Tanya (2021) Brackish Water Treatment With Sustainable Local Materials. In: International Conference of the Applications of Technology and Engineering (TICATE) 2023, 05-08-2021 - 05-08-2021, Jakarta - Indonesia.

Hermawan, Surya and Tjandra, Daniel and Purnomo, Joko (2018) The Benefit of Hydrodynamic Model As an Assessment of the Hydro-Environment Engineering in Decision Support System for the Sustainable Mariculture Development in Indonesia. In: 21st IAHR-APD Congress, 05-09-2018 - 05-09-2018, Yogyakarta - Indonesia.

Hermawan, Surya and WAHYUDI, GHO, DANNY (2019) Application and Lesson Learned in Civil Engineering, Environmental Science Service-Learning Program. In: The 7th Asia-Pacific Regional Conference on Service-Learning , 21-08-2019 - 21-08-2019, Singapore - Singapore.

Indarto, Indarto and Tjandra, Daniel and Soemitro, Ria Asih Aryani Perilaku variasi kadar air pada tanah ekspansif serta perannya terhadap nilai faktor adhesi dari daya dukung terhadap friksi pada pondasi tiang. In: 18th Annual National Conference on Geotechnical Engineering, 11-12 November 2016, Jakarta.

Indarto, and Tjandra, Daniel and Soemitro, Ria A. A. (2014) Perilaku variasi kadar air pada tanah ekspansif serta perannya terhadap nilai faktor adhesi dari daya dukung terhadap friksi pada pondasi tiang. In: 18th Annual National Conference on Geotechnical Engineering, 11-11-2014 - 11-11-2014, Jakarta - Indonesia.

Julistiono, Eunike Kristi (2009) Optimum Structural Patterns for Vertical Buildings. In: The Twelfth International Conference on Civil, Structural and Environmental Engineering Computing, 1-4 september 2009, Funchal, Madeira - Portugal.

Kanok-Nukulchai, Worsak and Tjong, Wong Foek (2007) A Finite Element Method Using Node-based Interpolation. In: The Third Asia-Pacific Congress on Computational Mechanics and the Eleventh International Conference, 01-01-2007 - 01-12-2007, Kyoto - Jepang.

Kuncoro, Albert and Antoni, and Hardjito, Djwantoro and Tanojo, Effendy (2022) Evaluation of bonding performance of ultra high-performance concrete with fly ash content as overlay on normal strength concrete. In: The 8th International Conference of EACEF 2022, 13-10-2022 - 13-10-2022, Yogyakarta - Indonesia.

Kuncoro, Albert and Antoni, and INDRIANTO, JUAN FELIX and RAYHAN, JONATHAN and Susanto, Tri Eddy and Hardjito, Djwantoro (2023) Mechanical Activation of OPC for Lower Strength UHPC with Reduced Silica Fume Content. In: The 4th International Conference on Green Civil and Environmental Engineering, 11-11-2023 - 11-11-2023, Malang - Indonesia.

Limanto, Sentosa (2014) ANALISA WAKTU PENGECORAN PADA LANTAI EMPAT PROYEK GEDUNG SEKOLAH DI SURABAYA. In: Seminar Nasional Teknik Sipil IV UMS Solo, 21 Mei 2014, Universitas Muhhammadiyah Solo (UMS).

Limanto, Sentosa (2009) ANALISIS PRODUKTIVITAS CONCRETE PUMP PADA PROYEK BANGUNAN TINGGI. In: Kemajuan Teknologi dan Implementasinya dalam Rekayasa Sipil dan Lingkungan, 6-7 mei 2009, Kampus UPH Karawaci, Jakarta.

Limanto, Sentosa (2009) ANALISIS PRODUKTIVITAS PEMANCANGAN TIANG PANCANG DENGAN JACK IN PILE. In: Seminar Nasional Teknik Sipil V 2009 ITS Surabaya, ISBN 978-979-99327-4-7, 11 February 2009, ITS, Surabaya.

Limanto, Sentosa (2009) Analisis Pemilihan Bahan Penghambat Kebakaran Pada Dinding. In: Pemanfaat Potensi Lokal Menuju Indonesia Produktif, 17 Desember 2009, Universitas Muhammadiyah Surakarta, Solo.

Limanto, Sentosa (2009) Analisis Produktivitas Pemancangan Steel Casing Pada Bored Pile Jembatan Suramadu Bentang Main Bridge. In: Peningkatan Daya Saing Bangsa Melalui Revitalisasi Peradaban, 20 Oktober 2009, Universitas Gunadarma, Jakarta.

Limanto, Sentosa (2009) Analisis Produktivitas Pemancangan Tiang Pancang Pada Bangunan Tinggi Apartemen. In: Perspektif Apartemen Bersubsidi Ditinjau Dari Multidisiplin Ilmu, 15 Agustus 2009, Universitas Kristen Maranatha, Bandung.

Limanto, Sentosa (2010) Evaluasi Investasi Proyek Pengembang Perumahan Memakai Mekanisme Aliran Dana Tahunan. In: Inovasi dan Penelitian Pascasarjana Dalam Bidang Teknik Sipil Untuk Mendukung Konstruksi yang berkelanjutan, 26 Mei 2010, ITB, Bandung.

Limanto, Sentosa (2010) Evaluasi Pemancangan Tiang Pancang Tekan Pada Bangunan Tinggi. In: Pengembangan Teknologi Dan Potensi Energi Untuk Kesejahteraan, 4 Desember 2010, Universitas Muhammadiyah Surakarta.

Limanto, Sentosa Investasi Pembangunan Apartemen Di Surabaya Yang Berwawasan lingkungan. In: Perspektif Apartemen Bersubsidi Ditinjau Dari Multidisiplin Ilmu, 15 Agustus 2009, Universitas Kristen Maranatha, Bandung.

Limanto, Sentosa (2009) MODEL ANALISIS INVESTASI PENGEMBANG PERUMAHAN. In: Pemanfaatan Potensi Lokal Menuju Indonesia Produktif, 17 Desember 2009, Universitas Muhammadiyah Surakarta.

Limanto, Sentosa (2009) STUDI AWAL PENERAPAN MANAJEMEN RISIKO PADA PERUSAHAAN ADONAN BETON SIAP PAKAI. In: Kemajuan Teknologi dan Implementasinya dalam Rekayasa Teknik Sipil dan Linkungannya, UPH-UAJ, May, 6-2009, UPH-Lippo Karawaci Jakarta.

Limanto, Sentosa (2008) Studi Awal Kebutuhan Material Bata Pada Proyek Perumahan Yang berwawasan Lingkungan. In: Teknologi Ramah Lingkungan dan Hemat Energi, 18 Desember 2008, Universitas Muhammadiyah Surakarta.

Limanto, Sentosa (2009) Studi Awal Produktivitas Pemancangan Steel Casing pile pada PYLON 47 Jembatan Suramadu. In: Pemanfaat Potensi Lokal Menuju Indonesia Produktif, Kamis, 17 Desember 2009, Universitas Muhammadiyah Surakarta, Solo.

Limanto, Sentosa (2009) Studi Pemilihan Bahan Penghambat Kebakaran Pasif Untuk Sebuah Gedung Berdasarkan SNI 03-1736-2000. In: Peningkatan Daya Saing Bangsa Melalui Revitalisasi Peradaban, 20 Oktober 2009, Universitas Gunadarma, Jakarta.

Limanto, Sentosa and Hadi Kusuma, Jonatan and Siswanto, Stephen H. and Wijaya, Hendri (2011) THE PRODUCTIVITY ANALYZES OF BORED PILE FONDATION IN THE MAIN BRIDGE AREA. In: The 3rd International Conference of European Asian Civil Engineering Forum, 20-22 September 2011, Yogyakarta, Indonesia.

Limanto, Sentosa and Indrojono J., Suwono and Sejo, Alesandro L. and Prakarsa, Rangga (2013) SISTEM SAMBUNGAN PADA PONDASI TAPAK BETON BERTULANG. In: Konfrensi Nasional PascaTeknik Sipil ITB Bandung, 21 November 2013, Bandung.

Limanto, Sentosa and Johanes Indrojono , Suwono and Wuisan, Danny and Raharjo, Christian (2013) KONSTRUKSI PONDASI TAPAK DAN SLOOF PADA STRUKTUR BAWAH RUMAH SEDERHANA SATU LANTAI. In: Konfrensi Nasional Teknik Sipil 7 (KoNTekS7Solo), 24-26 Oktober 2013, Universitas Nasional Sebelas Maret Solo.

Limanto, Sentosa and Kusuma, Jonathan H. (2010) Analisa Produktivitas Concrete Pump Pada Proyek Perkantoran Enam Lantai. In: Pengembangan Infrastruktur Dalam Menunjang Pembangunan Ekonomi Nasional, 21 January 2010, ITS, Surabaya.

Limanto, Sentosa and Kusuma, Jonathan H. and Stefanus, Andy Samuel and Suryotomo, Rachmat (2008) ANALISIS PRODUKTIVITAS PEKERJAAN DINDING SETENGAH BATA PADA RUMAH DUA LANTAI DI PROYEK PERUMAHAN. In: Konferensi Nasional Teknik Sipil 2 (KoNTekS 2), Yogjakarta, 6 Juli 2008, Universitas Atmajaya, Yogjakarta.

Limanto, Sentosa and Kusuma, Jonathan H.K and Wenas , Agustine and Gendo, Ricky (2013) PILE DRIVING WITH JACK-IN PILE AT BUILDING PROJECT. In: International Conference: Infrastructure Development For Enhancing Spatial Capacity, November 02-2013, Universitas Muhhammadiyah Solo (UMS).

Limanto, Sentosa and Patmadjaja, Harry and Gunawan, Jeksen and Putra, Eric Wangsa (2011) "Evaluasi Produktivitas Pemasangan Bata Beton Ringan Untuk Pekerjaan Dinding Pada Bangunan Hotel". In: Environmantal Talk: Toward a better green living, 9 - 13 Maret 2011, Universitas Mercu Buana, Jakarta.

Limanto, Sentosa and Witjaksono, Yuda Endro (2016) ANALISIS INDEKS LAPANGAN UNTUK PEKERJAAN COR BETON PADA STRUKTUR BALOK DAN PLAT GEDUNG BERTINGKAT TINGGI. In: Konferensi Nsional Teknik Sipil 10, Yogjakarta, 25-26 Oktober 2016, Universitas Atma Jaya, Yogjakarta.

Limanto, Sentosa and Witjaksono, Yuda Endro and Atmojo, Sumarlin Wongso and Pramana Wijaya, Indra (2010) "Produktivitas Material Beton Ringan Dalam Pemakaian Sebagai Konstruksi Dinding". In: Peluang Dan Tantangan Dalam Rekayasa Sipil Dan Lingkungan, 2 - 3 Juni 2010, Universitas Udayana, Bali.

Limanto, Sentosa (2014) Analisa Waktu Pengecoran Pada Lantai Empat Proyek Gedung Sekolah Di Surabaya. In: Seminar Nasional Teknik Sipil IV 2014, 21-05-2014 - 22-05-2014, Solo, Jawa tengah - Indonesia.

Liu, Yu and Chandra, Jimmy and Teng, Susanto (2011) Shear Analysis of Reinforced Concrete Slabs with Effective Moment of Inertia. In: 36th Conference on Our World in Concrete & Structures, 16-08-2011 - 16-08-2011, Singapura - Singapura.

Lumantarna, Benjamin and Pudjisuryadi, Pamuda and Ginsar, Ima Muljati and Teddy, S. (2012) PARTIAL CAPACITY DESIGN, A CASE STUDY OF STRUCTURE WITH VERTICAL SET-BACK. In: Seminar HAKI 2012, 11-07-2012 - , Jakarta - .

Muslikh, and Anggraini, N.K. and Hardjito, Djwantoro and Antonius, (2017) Behavior of Geopolymer Concrete Confined by Circular Hoops. In: 2nd International Joint Conference on Advance Engineering and Technology, 26-08-2017 - 26-08-2017, Denpasar - Indonesia.

Octavia, Tanti and Felecia, (2013) Developing of Variable Review Periods with Order Crossover. In: Logistic and Supply Chain Management 2013, 26-06-2013 - 28-06-2013, Surabaya - Indonesia.

Octavia, Tanti and Thali, Dessianne (2011) Comparative Study of Multi-item batch Scheduling and the Hybrid of Proposed and Colony Algorithm-Tabu Search. In: Logistic and Supply Chain Management 2012, 29-12-2011 - 28-06-2012, Taipei - taiwan.

Octavia, Tanti and Widyadana, I Gede Agus and Tjondrokusumo, Garry (2014) Penjadwalan Dengan Algoritma Disjunctive ProgrammingPada Permasalahan Job Shop (Studi Kasus Di U.D. Pari Jaya Makmur). In: Seminar Nasional Teknik Industri, 08-11-2014 - 08-11-2014, Surabaya - Indonesia.

PONTJOHARYO, WELLY and Tjong, Wong Foek and Budiman, Januar (2016) Analisis 3D Solids dengan Metode Elemen Hingga Berbasis Kriging. In: Seminar dan Pameran HAKI 2016, 23-09-2016 - 23-09-2016, Jakarta - Indonesia.

Palit, Herri Christian and Aysia, Debora Anne Yang (2016) The Effect of Musical Genre during Post Treadmill Exercise Recovery Time. In: The 4th SEANES International Conference on Human Factors and Ergonomics in South-East Asia, 28-11-2016 - 28-11-2016, Bandung - Indonesia.

Palit, Herri Christian and Aysia, Debora Anne Yang (2017) Pengaruh Lama Waktu Penggunaan Gadget terhadap Kekuatan Genggaman Tangan. In: Seminar Nasional dan Workshop PEI 2017, 13-10-2017 - 13-10-2017, Denpasar - Indonesia.

Palit, Herri Christian and Aysia, Debora Anne Yang and GUNAWAN, JESSICA PRISCILLIA (2022) THE EFFECT OF PHYSICAL ACTIVITY AND SLEEP DURATION ON STUDENTS SLEEP QUALITY IN EAST JAVA DURING COVID-19 PANDEMIC. In: International Conference on Engineering and Management in Industrial System (ICOEMIS), 05-10-2022 - 05-10-2022, Batu - Indonesia.

Prayogo, Doddy and GABY, GRETEL and WIJAYA, BOBBY HARTANTO and Tjong, Wong Foek and Tjandra, Daniel (2019) Reliability-based Design Optimization for Structures using Particle Swarm Optimization. In: International Conference on Sustainable Infrastructure, 28-10-2019 - 28-10-2019, Yogyakarta - Indonesia.

Prayogo, Doddy and Tjong, Wong Foek and SUGIANTO, STEVEN (2017) Enhanced Symbiotic Organisms Search (ESOS) for Global Numerical Optimization. In: International Conference on Advanced Mechatronics,Intelligent Manufacture, and Industrial Automation, 14-10-2017 - 14-10-2017, Surabaya - Indonesia.

Prayogo, Doddy (2018) Prediksi Kuat Tekan Beton dengan Menggunakan Metode Artificial Intelligence. In: Seminar Nasional Ilmu Terapan 2018, 11-10-2018 - 11-10-2018, Surabaya - Indonesia.

Prayogo, Doddy (2018) Using Biological Knowledge for Layout Optimization of Construction Site Temporary Facilities: A Case Study. In: The 4th Int. Conference on Sustainable Civil Engineering Structures and Construction Materials, 07-09-2018 - 07-09-2018, Yogyakarta - Indonesia.

Prayogo, Doddy and ERIC, SAMUEL and SUTANTO, JESSICA CHANDRA and SURYO, HIERONIMUS ENRICO (2018) Optimasi Tata Letak Fasilitas Proyek Konstruksi dengan Menggunakan Algoritma Metaheurisitik. In: Seminar Nasional Ilmu Terapan 2018, 11-10-2018 - 11-10-2018, Surabaya - Indonesia.

Prayogo, Doddy and HADRIAN, and Tjong, Wong Foek (2021) A comparative study of several nature-inspired algorithms in steel deck floor system cost optimization. In: the International Conference on Digital & Empathic Architecture & Civil Engineering (DEACE 2021) , 21-08-2021 - 21-08-2021, Surabaya - Indonesia.

Prayogo, Doddy and HARSONO, KENNETH and PRASETYO, KELVIN EKO and Tjong, Wong Foek and Tjandra, Daniel (2019) Application of Metaheuristic Algorithms in Truss Structure Sizing Optimization. In: Joint International Conference on Civil, Environmental, and Geo Engineering 2019, 02-10-2019 - 02-10-2019, Surabaya - Indonesia.

Prayogo, Doddy and HARSONO, KENNETH and PRASETYO, KELVIN EKO and Tjong, Wong Foek and Tjandra, Daniel (2019) Comparative Study of Particle Swarm Optimization Algorithms in Solving Size, Topology, and Shape Optimization. In: International Conference on Sustainable Infrastructure, 28-10-2019 - 28-10-2019, Yogyakarta - Indonesia.

Prayogo, Doddy and HARSONO, KENNETH and PRASETYO, KELVIN EKO and Tjong, Wong Foek and Tjandra, Daniel (2019) Size, Topology, and Shape Optimization of Truss Structures using Symbiotic Organisms Search. In: International Conference on Advanced Mechatronics,Intelligent Manufacture And Industrial Automation, 10-10-2019 - 10-10-2019, Batu - Indonesia.

Prayogo, Doddy and SEBASTIAN, and HAUWING, WILLIAM and Tjong, Wong Foek and Tjandra, Daniel (2019) Structural Design Optimization Using Particle Swarm Optimization and Its Variants. In: Joint International Conference on Civil, Environmental, and Geo Engineering 2019, 02-10-2019 - 02-10-2019, Surabaya - Indonesia.

Prayogo, Doddy and SUSANTO, Y.T.TEDDY (2018) Optimizing the prediction accuracy of load-settlement behavior of single pile using a self-learning data mining approach. In: The 4th Int. Conference on Sustainable Civil Engineering Structures and Construction Materials, 07-09-2018 - 07-09-2018, Yogyakarta - Indonesia.

Prayogo, Doddy and Tjong, Wong Foek and Tjandra, Daniel (2018) Prediction of High-Performance Concrete Strength Using a Hybrid Artificial Intelligence Approach. In: The 4th International Conference on Civil, Offshore & Environmental Engineering, 15-08-2018 - 15-08-2018, Kuala Lumpur - Malaysia.

Prayogo, Doddy and WIJAYANTI, EVELYN JANE and Tjong, Wong Foek (2021) A comparative study of several bio-inspired algorithms in cost optimization of cellular beams. In: the International Conference on Digital & Empathic Architecture & Civil Engineering (DEACE 2021) , 21-08-2021 - 21-08-2021, Surabaya - Indonesia.

Pudjisuryadi, Pamuda (2011) IN-ELASTIC PERFORMANCE OF 2D-TWO BAY ORDINARY CONCENTRICALLY BRACED STEEL FRAME. In: The 2nd International Conference on Earthquake Engineering and Disaster Mitigation, 19-07-2011 - 20-07-2011, Surabaya - Indonesia.

Pudjisuryadi, Pamuda (2011) TRANSVERSE STRESS DISTRIBUTION IN CONCRETE COLUMNS EXTERNALLY CONFINED BY STEEL ANGLE COLLARS. In: The 2nd International Conference on Earthquake Engineering and Disaster Mitigation, 19-07-2011 - 20-07-2011, Surabaya - Indonesia.

Pudjisuryadi, Pamuda and Lumantarna, Benjamin (2011) SEISMIC PERFORMANCE OF STRUCTURE WITH VERTICAL SET-BACK DESIGNED USING PARTIAL CAPACITY DESIGN. In: The 3rd International Conference of European Asian Civil Engineering Forum, 20-09-2011 - 22-09-2011, Yogyakarta - Indonesia.

Pudjisuryadi, Pamuda and Lumantarna, Benjamin and Teddy, Steviani and Wijoyo, Handoko (2011) SEISMIC PERFORMANCE OF STRUCTURE WITH VERTICAL SET-BACK DESIGNED USING PARTIAL CAPACITY DESIGN. In: The 3rd International Conference of European Asian Civil Engineering Forum, 20-22 September 2011, Yogyakarta, Indonesia.

Pudjisuryadi, Pamuda and Tanojo, Effendy Meshless Local Petrov-Galerkin Method For 2 Dimensional Elasticity Problems. In: International Civil Engineering Conference "Towards Sustainable Civil Engineering Practice".

Pudjisuryadi, Pamuda and Tavio, Tavio In-Elastic Performance of 2D-Two Bay Ordinary Concentrically Braced Steel Frame. In: 2nd International Conference on Earthquake Engineering and Disaster Migitation.

Pudjisuryadi, Pamuda and Tavio, Tavio and Suprobo, Priyo TRANSVERSE STRESS DISTRIBUTION IN CONCRETE COLUMNS EXTERNALLY CONFINED BY STEEL ANGLE COLLARS. In: 2nd International Conference on Earthquake Engineering and Disaster Mitigation.

Pudjisuryadi, Pamuda and Lumantarna, Benjamin and ARCAN, CHRISTIAN JUNIOR and PRATAMA, HARIS (2022) Application of modified partial capacity design on six-story Lshaped reinforced concrete buildings with variations on elastic columns configurations. In: The 8th International Conference of Euro Asia Civil Engineering Forum 2022, 14-10-2022 - 14-10-2022, Yogyakarta - Indonesia.

Purnomo, Joko and Han, Aylie and Gan, Buntara Sthenly and Hardjito, Djwantoro (2022) The effects of various parameters in sensitivity analysis of plain concrete beam using rigid body spring model. In: Advanced & Innovative Technology for Sustainable Infrastructure, 14-10-2022 - 14-10-2022, Yogyakarta - Indonesia.

RENATA, IVAN and Halim, Siana (2018) Solving real problem in plastic industry: A case in trim-loss problems. In: International Conference on Logistic and Business Innovation, 28-09-2018 - 28-09-2018, Kuta, Bali - Indonesia.

RINGU, ADRIAN JOENER PRATOMO and ANDREAS, EVAN and Antoni, and Hardjito, Djwantoro (2022) The Impact of Calcium Hydroxide Addition on HVFA Mortar and Concrete Properties. In: ICCIM 2023: The Third International Conference of Construction, Infrastructure, and Materials, 27-07-2022 - 27-07-2022, Jakarta - Indonesia.

RIYANTO, DICKY and Aysia, Debora Anne Yang (2014) Peningkatan Inventory Accuracy dengan Meninjau Ulang Error Handling Report secara Periodik di PT X. In: Seminar Nasional Teknik Industri, 08-11-2014 - 08-11-2014, Surabaya - Indonesia.

Rafiza, A. R. and Bakri, A. M. Mustafa Al and Kamarudin, H. and Hardjito, Djwantoro and Nizar, I. Khairul (2012) Characterization of LUSI Mud Volcano as Geopolymer Raw Material A Review. In: The 2nd International Malaysia Ireland Joint Symposium on Engineering, Science and Technology, 18-06-2012 - 19-06-2012, Kuala Lumpur - Malaysia.

Rayamajhi, Deepak and Anwar, Naveed and Chandra, Jimmy (2009) Different Techniques for the Modeling of Concrete Box Girder Bridges. In: IABSE Symposium 2009, Bangkok.

, Robby Yussac Tallar and Tanuwidjaja, Gunawan and Widjaya, Joyce Martha and Razafimahefa, Rina (2022) Accessible pedestrian paths for educational setting design evaluation: Case study in Surabaya and Bandung City, Indonesia and Brisbane City, Australia. In: The 8th International Conference of Euro Asia Civil Engineering Forum 2022, 12-10-2022 - 12-10-2022, Yogyakarta - Indonesia.

SANTOSA, CLAUDIA IRENE and PALIT, HERRI CHRISTIAN and Aysia, Debora Anne Yang (2022) PENGARUH COMPUTER WORKPLACE ERGONOMICS DESIGN TERHADAP KELUHAN MUSCULOSKELETAL DISORDER SELAMA PEMBELAJARAN DARING. In: Seminar Nasional Teknologi Informasi, Mekatronika dan Ilmu Komputer (SENTIMETER) 2022, 08-01-2022 - 08-01-2022, Sukabumi - Indonesia.

San, Gan Shu and Wahjudi, Didik and Anggono, Juliana and Tanoto, Yopi Yusuf (2017) The Effect of Brand Credibility on the Pricing of New and Remanufactured Short Life-cycle Product. In: IEEE First International Conference on Computational and Mathematical Methods in Engineering and Tec, 20-12-2017 - 20-12-2017, Melbourne - Australia.

San, Gan Shu (2017) The Conceptual Framework of Information Technology Adoption Decision-making in a Closed-loop Supply Chain. In: International Conference on Productivity and Sustainability in Science Engineering and Technology 20, 07-12-2017 - 07-12-2017, Jakarta - Indonesia.

San, Gan Shu and Anggono, Juliana and Wahjudi, Didik and Tanoto, Yopi Yusuf and RANDY, (2018) Characterization of Mobile Phone Cases for Remanufacturing Purpose. In: International Conference on Automotive, Manufacturing, and Mechanical Engineering (IC- AMME), 28-09-2018 - 28-09-2018, Denpasar - Indonesia.

San, Gan Shu and Pujawan, I Nyoman and Suparno, and Widodo, Basuki (2015) Pricing Decision for New and Remanufactured Product in a Closed-loop Supply Chain with Separate Sales-channel. In: The 23rd International Conference on Production Research, 02-08-2015 - 06-08-2015, Manila - Philippines.

San, Gan Shu and Pujawan, I Nyoman and Suparno, and Widodo, Basuki (2014) THE EFFECT OF RANDOM YIELD OF PRODUCT RETURNS TO THE PRICING DECISIONS FOR SHORT LIFE-CYCLE PRODUCTS IN A CLOSED-LOOP SUPPLY CHAIN. In: 6th International Conference on Operations and Supply Chain Management, Bali, 2014, 10-12-2014 - 12-12-2014, Denpasar, Bali - Indonesia.

Setiawan, Rudy (2017) Impact of the Additional Parking Space on Parallel Parking Maneuver Time. In: 1st International Symposium on Transportation Studies in Developing Countries (ISTSDC), 04-11-2017 - 04-11-2017, Makassar - Indonesia.

Setiawan, Rudy (2016) PERBEDAAN FASILITAS PARKIR UNTUK MENDORONG MAHASISWA BERKENDARA BERSAMA KE KAMPUS. In: Simposium XIX Forum Studi Transportasi antar Perguruan Tinggi, 12-10-2016 - 12-10-2016, Yogyakarta - Indonesia.

Setiawan, Rudy (2020) The Effect of Service Quality and Service Value on Suroboyo Bus Passenger Satisfaction. In: International Conference on Science, Infrastructure Technology and Regional Development, 25-10-2020 - 25-10-2020, Lampung - Indonesia.

Setiawan, Rudy and DAMMARA, ARCELINA SAPUTRI and CAHYADI, BILLY and Widarno, Bryan and NJOKO, FILLBERT HANSELLY and NOVIANI, MARIA (2021) Changes in drivers viewing frequency, maneuver duration, and degree of difficulty during back-in parking maneuver with different conditions of parking spaces. In: Digital & Emphatic Engagement in the New Era for Architecture & Civil Engineering, 21-08-2021 - 21-08-2021, Surabaya - Indonesia.

Setiawan, Rudy and Japarianto, Edwin and SANTOSO, KATHERINA STEFANI and SAMSUDIN, YOHANES MALVIN (2023) The impact of service quality and passenger satisfaction on passenger loyalty of Petra shuttle bus. In: The Third International Conference of Construction, Infrastructure, and Materials (ICCIM 2023), 27-07-2023 - 27-07-2023, Jakarta - Indonesia.

Setiawan, Rudy and Santosa, Wimpy (2011) POTENSI PENERAPAN REMOTE PARKING AREA UNTUK MENINGKATKAN OKUPANSI MOBIL DI UNIVERSITAS KRISTEN PETRA SURABAYA. In: Simposium XIV Forum Studi Transportasi antar Perguruan Tinggi (FSTPT), 11-11-2011 - 12-11-2011, Pekanbaru - Indonesia.

Setiawan, Rudy and Santosa, Wimpy and Sjafruddin, Ade (2014) Keterkaitan Kebiasaan Mahasiswa Menggunakan Mobil ke Kampus dengan Karakteristik Demografi, Ekonomi, dan Perjalanan Mahasiswa ke Kampus. In: The 17th FSTPT International Symposium, 22-08-2014 - 24-08-2014, Jember - Indonesia.

Setiawan, Rudy and Santosa, Wimpy and Sjafruddin, Ade (2017) The Effect of Students’ Car Access and Car Use Habits on Student Behavior to Reduce Using Cars for Traveling to Campus. In: The 3rd International Conference on Sustainable Civil Engineering Structures and Construction Materi, 07-09-2017 - 07-09-2017, Sanur, Bali - Indonesia.

Soehartono, Frans and Santoso, Anik Juniwati and Hariyanto, Agus Dwi (2010) Penerusan Panas Pada Dinding Glass Blok Lokal. In: RAPI, 2010, December 4, universitas Negeri Sebelas Maret, Surakarta.

Sutrisno, and SIHOTANG, AYUB GULICK and Sugondo, Suwandi (2014) STUDI NUMERIK RADIUS VOLUTE TONGUE RUMAH KEONG PADA BLOWER SENTRIFUGAL. In: Seminar Nasional Teknik Mesin 9, 14-08-2014 - 14-08-2014, Surabaya - Indonesia.

Tanojo, Effendy and Pudjisuryadi, Pamuda Meshless Methods: Alternatives For Solving 2D Elasticity Problems. In: International Civil Engineering Conference "Towards Sustainable Civil Engineering Practice".

Tanoto, Yopi Yusuf and San, Gan Shu and Wahjudi, Didik and PONTJONOTO, NIKO ADRISENNA (2018) Process Planning for Mobile Phone Remanufacturing in Indonesia. In: International Conference on Automotive, Manufacturing, and Mechanical Engineering, 28-09-2018 - 28-09-2018, Denpasar - Bali.

Tanuwidjaja, Gunawan and Adiasih, Priskila and , Robby Yussac Tallar and Hediyanto, Alvin Try and Oktamadya, M Ichsan and Suhardi, Dwi Natalia and Halawa, Heuristik and Davin, Gerarldo and Taniono, Michael and Razafimahefa, Rina Hariniaina (2021) Reflection of Low Vision Students on Pedestrian Paths Accessibility in Indonesia and Australia for People with Disabilities: Case study of Surabaya, Bandung and Brisbane. In: Indonesia Council Open Conference (ICOC 2021), 16-07-2021 - 16-07-2021, Brisbane - Australia.

Tarigan, Zeplin Jiwa Husada (2009) THE IMPACT OF STRATEGIC PURCHASING TO THE SUPPLIER INVOLVEMENT THROUGH COMMUNICATION, COORDINATION AND COLLABORATION IN SMAAL AND MEDIUM ENTERPRISES. In: International Seminar on Industrial Engineering and Management, December 10th-11th ,2009, Bali - Indonesia.

Tarigan, Zeplin Jiwa Husada and Basana, Sautma Ronni and Suprapto, Widjojo Suprapto (2012) The Influences of Organizational Citizenship Behavior (OCB) Key Users to the Performance of Manufacturing Companies in Implementing Enterprise Resources Planning (ERP) technology. In: International Seminar on apllied technology, 3rd APTECS 2011 ITS Surabaya, December, 6th, 2011, Surabaya.

Tavio, Tavio and Pudjisuryadi, Pamuda and Suprobo, Priyo L-Shaped Steel Collars: An Alternative External Confining Retrofit for Improving Ductility and Strength of Rectangular Concrete Columns. In: Advancing Eco-Concrete Technology for a Lifetime Sustainability.

Tjandra, Daniel (2010) Analisa Penuruan Bangunan Gereja GPIB Rungkut Surabaya. In: Analisa Penuruan Bangunan Gereja GPIB Rungkut Surabaya, 2010, Rungkut.

Tjandra, Daniel and Budi, Gogot (2009) Pengaruh Elektrokinetik Terhadap Peningkatan Daya Dukung Tanah Lempung Lunak. In: PIT XIII HATTI 2009, Bali.

Tjandra, Daniel and Budi , Gogot Setyo (2009) Pengaruh Elektrokinetik Terhadap Peningkatan Daya Dukung Tanah Lempung Lunak. In: PIT XIII Hatti, 2009, Bali.

Tjandra, Daniel and Wulandari, Paravita Sri (2019) The shear strength alteration on clay soil considering the plasticity index and the percentage of fine aggregates in tropical climate regions. In: 7th International Conference on Euro Asia Civil Engineering Forum, 02-10-2019 - 02-10-2019, Stuttgart - Germany.

Tjong, Wong Foek and Liliana, (2014) Pengembangan Progam Perhitungan Berbasis Internet untuk Pembelajaran Metode Elemen Hingga. In: Konferensi Nasional Teknik Sipil 8, 16-10-2014 - 17-10-2014, Bandung - Indonesia.

Tjong, Wong Foek and WIDJAJA, KRISTOFER and SOETANTO, RICHO MICHAEL (2016) Studi Keakuratan dan Kekonvergenan Metode Elemen Hingga Berbasis Kriging dan Konvensional. In: Seminar dan Pameran HAKI 2016, 23-09-2016 - 23-09-2016, Jakarta - Indonesia.

Tjong, Wong Foek (2011) A Breakthrough Enhancement of FEM using Kriging Interpolation. In: The 1st Indonesian Structural Engineering and Materials Symposium, 17-11-2011 - 18-11-2011, Bandung - Indonesia.

Tjong, Wong Foek (2013) Kriging-based Finite Element Methods for Analyses of Shear Deformable Beams and Plates. In: The 6th Civil Engineering Conference in Asian Region and Annual HAKI Conference, 20-08-2013 - 22-08-2013, Jakarta - Indonesia.

Tjong, Wong Foek (2013) Testing of Shell Elements using Challenging Benchmark Problems. In: The 2nd Indonesian Structural Engineering and Materials Symposium, 07-11-2013 - 08-11-2013, Bandung - Indonesia.

Tjong, Wong Foek and ERWIN, and RICHARD, ALEXANDER and Katili, Irwan (2017) Development of the DKMQ element for buckling analysis of shear-deformable plate bending. In: Sustainable Civil Engineering Structures and Construction Materials, 22-02-2017 - 22-02-2017, Bali - Indonesia.

Tjong, Wong Foek and ISTIONO, HERI (2024) On the Convergence and Accuracy of the Partition of Unity-based T3-CNS and T3-DNS Elements in Surface Fittings. In: International Conference on Civil, Architecture, Environmental Engineering and Technology, 28-09-2024 - 28-09-2024, Surabaya - Indonesia.

Tjong, Wong Foek and Kanok-Nukulchai, Worsak (2008) A Kriging-based Finite Element Method for Analyses of Shell Structures. In: The Eighth World Congress on Computational Mechanics, 01-01-2008 - 01-06-2008, Venice - Italy.

Tjong, Wong Foek and Kanok-Nukulchai, Worsak (2006) Kriging-based Finite Element Method for Analyses of Reissner-Mindlin Plates. In: The Tenth East-Asia Pacific Conference on Structural Engineering and Construction, 01-01-2006 - 01-08-2006, Bangkok - Thailand.

Tjong, Wong Foek and Kanok-Nukulchai, Worsak (2006) On Alleviation of Shear Locking in the Kriging-Based Finite Element Method. In: International Civil Engineering Conference “Towards Sustainable Engineering Practice”, 01-01-2006 - 01-08-2006, Surabaya - Indonesia.

Tjong, Wong Foek and Prayogo, Doddy and PUTRA, REINARD EKA and JOSEPH, JAN (2019) Member SIzing Optimization of Steel Space Trusses Designed based on AISC 360-10 using Symbiotic Algorithms Search. In: International Conference on Sustainable Infrastructure, 28-10-2019 - 28-10-2019, Yogyakarta - Indonesia.

Tjong, Wong Foek and Prayogo, Doddy and PUTRA, REINARD EKA and JOSEPH, JAN (2019) Optimasi Ukuran Penampang Rangka Batang Baja Berskala Besar berdasarkan SNI 1729:2015 dengan Metode Symbiotic Organisms Search. In: Seminar HAKI-ISSC 2019, 21-11-2019 - 21-11-2019, Yogyakarta - Indonesia.

Tjong, Wong Foek and SOETANTO, RICHO MICHAEL and Budiman, Januar (2017) On the Accuracy and Convergence of the Hybrid FE-meshfree Q4-CNS Element in Surface Fitting Problems. In: The Third International Conference on Sustainable Infrastructure and Built Environment, 27-09-2017 - 27-09-2017, Bandung - Indonesia.

Tjong, Wong Foek and Sulistio, Adam (2016) A Locking-free Kriging-based Timoshenko Beam Element with the Discrete Shear Gap Technique. In: The 12th World Congress on Computational Mechanics and the 6th Asia-Pacific Congress on Computationa, 01-10-2016 - 01-10-2016, Seoul - Republic of Korea.

Wahjudi, Didik and San, Gan Shu and Tanoto, Yopi Yusuf and WINATA, JERRY (2018) Drivers and Barriers of Mobile Phone Remanufacturing Business in Indonesia: Perspectives of Retailers. In: The 1st International Conference on Automotive, Manufacturing, and Mechanical Engineering (IC-AMME), 28-09-2018 - 28-09-2018, Denpasar - Indonesia.

Warpindyasmoro, Heri Saptono and Tumbelaka, Hanny Hosiana (2018) Wave Energy Conversion with floating objects for the coast of East Java. In: The 6th INTERNATIONAL SEMINAR ON OCEAN AND COASTAL ENGINEERING, ENVIRONMENTAL AND NATURAL DISASTER M, 08-11-2018 - 08-11-2018, Surabaya - Indonesia.

Wibowo, Mariana and Santoso, Michael (2021) Marketplace Based Application System to Improve Customer Satisfaction on Laundry Business. In: IC AMME & LSCM 2021The 2nd International Conference on Automotive, Manufacturing, and Mechanical Eng, 02-10-2021 - 02-10-2021, Surabaya - Indonesia.

Widigdo, Wanda K and Hartono, Samuel (2010) Bantaran Kali Jagir, Surabaya sebagai Ruang Terbuka Hijau (RTH). In: Seminar Nasional arsitektur (di) Kota " Hidup dan berkehidupan di Surabaya", 27 Mei 2010, Surabaya.

Wulandari, Paravita Sri (2013) ANALYSIS OF PILED RAFT FOUNDATIONS IN CLAYEY SOILS USING FINITE ELEMENT AND ANALYTICAL METHODS. In: The Thirteenth East Asia-Pacific Conference on Structural Engineering and Construction, 11-09-2013 - 13-09-2013, Sapporo - Japan.

Wulandari, Paravita Sri (2013) Analysis of Piled Raft Foundations in Clayey Soils using Finite Element and Analytical Methods. In: The Thirteenth East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-13), 11-09-2013 - 13-09-2013, Sapporo - Jepang.

Wulandari, Paravita Sri and LESTYANA, HANSEN RICHARDO and JOHNSON, and TRANGGONO, JASON FRAN (2021) Sustainable road-kill mitigation in Gladak Perak Bridge at Lumajang, Indonesia. In: Digital & Empathic Architecture & Civil Engineering (DEACE 2021), 12-11-2021 - 12-11-2021, Surabaya - Indonesia.

Wulandari, Paravita Sri and Tjandra, Daniel (2018) PENGARUH NILAI INDEKS PLASTISITAS TANAH LEMPUNG TERHADAP PERUBAHAN KUAT KOKOH TANAH LEMPUNG AKIBAT VARIASI KADAR AIR. In: Konferensi Nasional Teknik Sipil 12, 19-09-2018 - 19-09-2018, Batam - Indonesia.

Wulandari, Paravita Sri and Tjandra, Daniel (2016) Use of Crumb Rubber as an Additive in Asphalt Concrete Mixture. In: Sustainable Civil Engineering Structures and Construction Materials, SCESCM 2016, 05-09-2016 - 05-09-2016, Bali - Indonesia.

Experiment

Limanto, Sentosa and Witjaksono, Yuda Endro and Anderson, Stepanie Marth and Saputra, Andi (2011) Studi Kasus Mengenai Struktur Organisasi Pelaksana Lapangan pada Proyek Konstruksi di Surabaya. [Experiment]

Image

Budi, Gogot and Tjandra, Daniel (2009) Analisa Penurunan Bangunan Gereja GPIB enta Kasih Rungkut Surabaya. [Image]

Budi, Gogot and Wong, Foek Tjong and Muljati, Ima (2010) Perbaikan Kinerja Struktur akibat Penurunan Pondasi GPIB Genta Kasih. [Image]

Tjandra, Daniel (2010) Pra-Munas BMPTTSSI, BMPTTSSI. [Image]

Tjandra, Daniel (2010) Tim Independen FTSP untuk Dinas Cipta karya dan tata ruang pemerintahan kota surabaya. [Image]

Tjandra, Daniel (2010) Tim Independen FTSP untuk Dinas Cipta karya dan tata ruang pemerintahan kota surabaya. [Image]

Monograph

Antoni, and HARTONO, FLORENTCIA and TANUWIJAYA, STEVEN and WIJAYA, KEVIN and Hardjito, Djwantoro (2022) Investigasi Potensi Fly Ash dari PLTU Baru atau Belum Dikenal Sebagai Material Pengikat pada Beton. Technical Report. LPPM UK Petra.

Budi, Gogot and Hartono, Christian and Sugiarto, - STUDI BANDING PONDASI STRIP FOOTING DENGAN PONDASI SHELL TRIANGULAR STRIP FOOTING PADA TANAH LIAT. Project Report. 2002.

Budi, Gogot and Setyawan, Ferry and Gunawan, Suryadi (2003) PENINGKATAN KEKUATAN TANAH LEMPUNG DI DAERAH GROUP KOLOM YANG TERBUAT DARI LIMBAH KARBIT DAN GARAM. Project Report. Fakultas Teknik Sipil dan Perencanan.

Muljati, Ima and Lumantarna, Benjamin and Goenawan, Adveni Novaline and Wijaya, Monita Lanny (2010) Evaluasi Kinerja Bangunan Tidak Beraturan 6- dan 10-lantai dengan Vertical Set-Back 50% diWilayah 2 Peta Gempa Indonesia yang Direncanakan Secara Pseudo Elastis dan Kapasitas Sesuai SNI 03-2847-2002. Technical Report. Civil Engineering Department, Surabaya. (Unpublished)

Muljati, Ima and Lumantarna, Benjamin and Lauwis, Teguh and Sujanto, Indra (2010) Evaluasi Kinerja Bangunan Tidak Beraturan 6- dan 10-Lantai dengan Vertical Set-Back 50% di Wilayah 6 Peta Gempa Indonesia yang Direncanakan secara Pseudo Elastis dan Kapasitas Sesuai SNI 03-2847-2002. Technical Report. Civil Engineering Department, Surabaya. (Unpublished)

Muljati, Ima and Lumantarna, Benjamin and Santoso, Andrew Christian Herwanto and Sutanto, Andy (2011) Perencanaan Pseudo Elastis: Evaluasi Kolom Elastis pada Bangunan Tidak Beraturan 6- dan 10-Lantai dengan Vertical Set-Back 50% di Wilayah 6 Peta Gempa Indonesia. Technical Report. Civil Engineering Department, Surabaya. (Unpublished)

Muljati, Ima and Lumantarna, Benjamin and Sibarani, Barnabas and Kodrat, Bobby Liantono (2011) Perencanaan Pseudo Elastis: Evaluasi Kolom Elastis pada Bangunan Tidak Beraturan 6- dan 10-Lantai dengan Vertical Set-Back 50% di Wilayah 2 Peta Gempa Indonesia. Technical Report. Civil Engineering Department, Surabaya. (Unpublished)

Muljati, Ima and Lumantarna, Benjamin and Suwadji, Felix and Limanto, Lisayuri and Sutanto, Fandy Indra and Martinus, Albert (2011) Contoh Aplikasi ASCE 7-10 Sebagai Standar Perencanaan Ketahanan Gempa di Indonesia. Technical Report. Civil Engineering Department, Surabaya. (Unpublished)

Muljati, Ima and Lumantarna, Benjamin and Suwadji, Felix and Limanto, Lisayuri and Sutanto, Fandy Indra and Martinus, Albert (2011) Studi Awal ASCE 7-10 Sebagai Standar Perencanaan Ketahanan Gempa di Indonesia. Technical Report. Civil Engineering Department, Surabaya. (Unpublished)

Muljati, Ima and Santoso, Hasan and Darmawan, Alvin and Hermawan, Peter (2011) Kinerja Struktur Baja dengan Sistem Rangka Pemikul Momen Khusus yang Menggunakan Reduced Beam Section dalam Dua Arah Orthogonal. Technical Report. Civil Engineering Department, Surabaya. (Unpublished)

Muljati, Ima and Santoso, Hasan and Limongan, John and Leonanta, Yudi Setyadi (2010) Evaluasi Kinerja Struktur Baja dengan Sistem Rangka Pemikul Momen Khusus (SRPMK) yang Menggunakan Reduced Beam Section di Wilayah 2 Peta Gempa Indonesia. Technical Report. Civil Engineering Department, Surabaya. (Unpublished)

Muljati, Ima and Santoso, Hasan and Luis, Christian and Hadinyoto, Try Wibowo (2010) Evaluasi Kinerja Struktur Baja dengan Sistem Rangka Pemikul Momen Khusus (SRPMK) yang Menggunakan Reduced Beam Section di Wilayah 6 Peta Gempa Indonesia. Technical Report. Civil Engineering Department, Surabaya. (Unpublished)

Muljati, Ima and Santoso, Hasan and Purnamasari, Intan and Nyotosetiadi, Ivana (2011) Evaluasi Kinerja Sistem Ganda SRPMK dan SRBE yang Menggunakan Reduced Beam Section pada Kedua Arah Orthogonal Bangunan di Wilayah 2 Peta Gempa Indonesia. Technical Report. Civil Engineering Department, Surabaya. (Unpublished)

Muljati, Ima and Tanojo, Effendy and An, Ta and Arief, Yehezkiel (2011) Evaluasi Kinerja Sistem Ganda SRPMK dan SRBK yang Menggunakan Reduced Beam Section pada Kedua Arah Orthogonal Bangunan di Wilayah 2 Peta Gempa Indonesia. Technical Report. Civil Engineering Department, Surabaya. (Unpublished)

Muljati, Ima and Tanojo, Effendy and Singgih, Erwin and Luntungan, Normans (2012) PERBANDINGAN RSNI BAJA CANAI DINGIN DENGAN STANDAR AMERIKA AISI S100-07. Technical Report. Civil Engineering Department, Surabaya. (Unpublished)

Pudjisuryadi, Pamuda Anggota Tim Revisi SNI 03-2847-1992 "Tata Cara Perhitungan Struktur Beton untuk Bangunan Gedung". Manual. Badan Standarisasi Nasional. (Unpublished)

Pudjisuryadi, Pamuda Sekretaris tim penyusun RSNI Baja Canai Dingin. Manual. Badan Standarisasi Nasional. (Unpublished)

Pudjisuryadi, Pamuda and Antoni, Antoni (2009) Report of Survey on Baptist Church Building, post Padang Earthquake 2009. Technical Report. Faculty of Civil Engineering and Planning, Petra Christian University. (Submitted)

Pudjisuryadi, Pamuda and Lumantarna, Benjamin and Budi, Gogot SK Pembentukan Tim Ahli Struktur dan Mekanika Tanah. Documentation. Pemerintah Kota.

Pudjisuryadi, Pamuda and Muljati, Ima (2012) SK Pembentukan Tim Penyusun RSNI "Persyaratan Standar Perumahan untuk Beton Struktural". Documentation. Departemen Pekerjaan Umum.

Pudjisuryadi, Pamuda and Tavio, Kinerja Baja Siku Sebagai Elemen Pengekang Eksternal Kolom Beton Bertulang Persegi. Project Report. LPPM - Universitas Kristen PETRA. (Submitted)

Tanoto, Yusak and Praptiningsih, Maria (2012) MACRO INDICATORS IMPACT TOWARDS RESIDENTIAL ELECTRICITY CONSUMPTION IN INDONESIA. Project Report. Institut of Research and Community Outreach.

Other

Antoni, Antoni Membimbing Doktor. Universitas Kristen Petra. (Unpublished)

Antoni, Antoni Membimbing Skripsi/TA. Universitas Kristen Petra. (Unpublished)

Antoni, Antoni Membimbing Tesis/Disertasi. Universitas Kristen Petra. (Unpublished)

Antoni, Antoni Mendapatkan Hibah Penelitian Kompetitif (sebagai ketua). Universitas Kristen Petra. (Unpublished)

Antoni, Antoni Menjadi Reviewer Jurnal Internasional Bereputasi. Universitas Kristen Petra. (Unpublished)

Antoni, Antoni pembimbing thesis. Universitas Kristen Petra. (Unpublished)

Hermawan, Surya Metode Menentukan Model Hidrodinamika Regional Grid. UNIVERSITAS KRISTEN PETRA.

Hermawan, Surya Metode Prakiraan Tinggi Gelombang Laut Maksimum. UNIVERSITAS KRISTEN PETRA.

Pudjisuryadi, Pamuda and Chandra, Jimmy (2010) Perhitungan Struktur Sekolah GKJW Wiyung. Petra Christian University, Surabaya. (Submitted)